Manuals / Panasonic / Photography / Digital Camera

Panasonic DMC-LZ1PP, DMC-LZ2PP operating instructions FCC Note U.S. only

Models: DMC-LZ1PP

1 116

Download 116 pages 2.28 Kb

Page 3

FCC Note: (U.S. only)

Before Use

FCC Note: (U.S. only)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: To assure continued compliance, follow the attached installation instructions and use only shielded interface cables with ferrite core when connecting to computer or peripheral devices.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Trade Name:	Panasonic
Model No.:	DMC-LZ2
	DMC-LZ1
Responsible party: Panasonic
	Corporation of
	North America
	One Panasonic
	Way, Secaucus, NJ
	07094
Support Contact:	Panasonic
	Consumer
	Electronics
	Company
	1-800-272-7033

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003

3

VQT0P65

Image 3

Panasonic DMC-LZ1PP, DMC-LZ2PP operating instructions FCC Note U.S. only

Contents

VQT0P65 DMC-LZ1PPOperating Instructions Digital CameraInformation for Your Safety Dear CustomerU.S.A. CONSUMERS ONLY FCC Note U.S. only ∫ About the Lens ∫ About Condensation When the lens is fogged up∫ Care for the camera ∫ About the LCD monitor∫ If you will not be using the camera for a long time ∫ About illustrations of the cursor button About These Operating InstructionsCompensating the Exposure ∫ About illustrations in these operating instructionsRecording pictures basic ContentsRecording Menu Settings Before UseSpecifications Connecting to a PC or PrinterPlayback advanced Others3 1 DMC-LZ2 2 DMC-LZ1 Standard AccessoriesNames of the Components Microphone DMC-LZ2 only P55 13 143 Play back the pictures Quick Guide1 Insert the batteries. P13 2 Turn the camera on to take pictures∫ Usable batteries About the BatteriesA When oxyride batteries are selected B When alkaline/Ni-MH batteries are selected∫ Proper Care and Handling of the Batteries ∫ Battery indication∫ Unusable batteries ∫ Shapes of batteries that cannot be usedPage Recording conditions by CIPA standard When you do not use batteries for a long period of time∫ The battery life e.g., when taking pictures everyPlayback time Recordable number in low temperatures In normal picture modeInserting/Removing the Batteries 1 Slide the battery door to open it3 1 Close the battery door 2 Slide the battery door to the end and then close it firmlyRemove Push the card until it clicks, then pull the card out upright Inserting/Removing the Card Optional1 Slide the card door to open it 2 InsertThe built-in memory cannot be used when the card is inserted About the Built-in Memory/the CardWhen you do not use the card, you can When you use the card, you can record or play back pictures on it∫ Access to the built-in memory or the card Approximate number of recordable pictures and the size ∫ Initial setting Setting Date/Time Clock Set2 Select M/D/Y, D/M/Y or Y/M/D 1 Set date and time2 Press the MENU button About the Setup Menu3 Select the SETUP Menu 1 Turn the camera onOXYRIDE ZR6 BATTERY TYPEPOWER SAVE ALKALINE LR6/Ni-MHUSB MODE ECONOMY Economy mode onlyNO.RESET RESETITALIANO Italian SCENE MENULANGUAGE ENGLISH English DEUTSCH German FRANÇAIS French ESPAÑOL SpanishIn playback mode P49 About the LCD MonitorIn recording mode P31 In simple mode P35∫ Recording guide line ∫ HistogramExample of histogram Normal picture mode P31 Taking Pictures1 SCN ∫ The Mode Dial1 1 Turn the camera on 2 Select normal picture mode 3 Take a picture∫ Normal recording ∫ AF/AE Lock AF Auto focus AE Auto exposure ∫ Focusing ∫ Jitter camera shake∫ Direction detection function ∫ Exposure PICT.MODE Taking Pictures in Simple ModeSIMPLE MODE 1 Select the desired item and set the desired value∫ Other Settings in Simple mode You cannot set the following items in the simple mode NO.RESET RESET Checking the Recorded Picture Review 1 Press2 Enlarge and shift the picture Using the Optical Zoom ∫ To make subjects appear further away use Wide∫ To make subjects appear closer use Tele A Photo flash Taking Pictures using the Built-in Flash∫ Switching to the appropriate flash setting Use this when your subject is back-lit or under fluorescent lightAvailable flash control range ∫ Available flash settings by recording mode∫ The available flash range to take pictures ISO sensitivityDo not stare at the photo flash from close proximity ∫ Shutter speed for each flash settingFlash setting Shutter speed SecTaking Pictures with the Self-timer 1 Select the self-timer mode2 Take the picture Compensating the Exposure Under exposedProperly exposed Over exposed 1 Press 3 several times until Taking Pictures using Auto BracketA Optical image stabilizer button Optical Image StabilizerWhen the burst mode setting is set to Unlimited Taking Pictures using Burst Mode1 Select the burst mode ∫ Number of pictures recorded in burst modeWhen the burst mode is activated, AUDIO REC. cannot be used DMC-LZ2 only Playing Back Pictures 1 Select the picture1000001 2 Select the pictures 1 Switch to multi screen9 Pictures Multi Playback 1 2 4 5 7 82 Shift the picture Using the Playback Zoom1 Rotate the zoom lever towards to enlarge the picture1 Select MULTI DELETE Deleting Pictures1 Select the picture to be deleted 2 Delete the picture∫ To delete all pictures 3 Delete the pictures2 Delete all of the pictures 1 Select ALL DELETEHow to turn the LCD monitor on again Using the Mode DialEconomy mode Macro mode3 Press the shutter button fully to start the recording Motion image mode2 Press the shutter button halfway 1 Select MOTION RATEYou cannot record audio on DMC-LZ1 ∫ Available recording time secondsScene mode ∫ Technique for Sports mode Portrait modeSports mode ∫ Technique for Portrait mode To make this mode more effectiveScenery mode Night scenery mode∫ Technique for Night scenery mode ∫ Technique for Fireworks mode Night portrait modeFireworks mode ∫ Technique for Night portrait mode Use the flashParty mode Snow mode∫ Technique for Party mode Recording Menu Settings Using the REC mode menu∫ Auto White Balance White Balance W.BALANCEAbout the white balance ∫ Setting the White Balance manually White set∫ Finely Adjusting the White Balance White Balance Fine Adjustment About the white balance fine adjustmentDMC-LZ2 ISO Sensitivity SENSITIVITYPicture Size PICT.SIZE ISO sensitivityAudio Recording AUDIO REC Quality QUALITYDMC-LZ2 only F4.5 1/60 AF Mode AF MODESlow Shutter SLOW SHUTTER Digital Zoom D.ZOOM1/8-1 settingColor Effect COL.EFFECT Picture Adjustment PICT.ADJ1000001 Playing Back Pictures with Audio/Motion Images∫ Pictures with audio DMC-LZ2 only Select the picture with audio icon and play back the audioPROTECT Using the PLAY mode menuPLAY 1 ROTATE∫ Example When rotating clockwise 1 Select ON to set itRotating the Picture ROTATE 1 Select the picture to be rotated and set itPrints DPOF PRINT Setting the Picture to be Printed and the Number of1 Select SINGLE, MULTI or CANCEL 2 Select the direction to rotate the pictureCANCEL ALL DPOF ∫ Single setting Select the picture and set the number of prints∫ Multi setting Select the pictures and set the number of prints ∫ To cancel all settings Select YES to cancel all settingsPreventing Accidental Erasure of the Picture PROTECT 1 Select SINGLE, MULTI or CANCEL∫ Single setting Select the picture and set/cancel the protection 3 By pressing the MENU button, the Slide Show stops Playing Back with Slide Show1 Set the items of the Slide Show 2 Select START1 Select the picture and start audio recording ∫ SD Slide ShowAdding Audio to Recorded Pictures AUDIO DUB DMC-LZ2 only 2 Select the size and set it 2 Stop audio recordingResizing the Pictures RESIZE 1 Select the picture and set itTRIMMING Trimming the Pictures3 Select YES or NO and set it 1 Select the picture to trim and set itZOOM 2 Enlarge or decrease the picture3 Shift the picture and press the shutter button to set 4 Select YES or NO and set it3 Select YES and set it Copying Picture Data COPY1 Select the direction to copy the picture data 2 Select pictures to be copied and set them1 Select YES to format the medium Initializing the Built-in Memory the Card FORMATDuring formatting, do not turn the camera off 3 Turn the TV on and select external input 4 Turn the camera on and then set the mode dial to playback modePlaying Back Pictures on a TV Screen 1 Connect the AV cable A supplied to the AV OUT socket of the camera2 Select PC or PictBridge PTP Before Connecting to the PC or the PrinterUSB MODE 1 Select USB MODEUSB driver and then connect it to the computer Connecting to a PC2 Connect the camera to a PC via the USB connection cable A supplied If you use Windows 98/98SE, install the100PANA ∫ PictBridge PTP setting∫ Folder Composition DCIM2 Turn on the printer Connecting to a PictBridge-compliant Printer1000001 2 Set the print settings1 Select a picture to be printed ∫ Single picturePAGE LAYOUT 3 Select PRINT START and then print out the picture1 Select DPOF PICTURE 2 Select PRINT START and then print out the picture∫ Layout printing ∫ Setting the date printing with the DPOF print in advanceWhen printing a picture several times on 1 sheet of paper cable when the cable disconnection warning icon is indicatedScreen Display F2.8 1/25∫ In recording ∫ Recording in simple mode F2.8 1/25 In Motion image mode1000001 1000 DEC∫ Optimal Use of the Camera Cautions for UseWhen carrying the camera, take care not to drop or cause impact to it Do not use benzine, thinner or alcohol for cleaning the camera∫ Batteries When you go out, bring spare batteries∫ Card Do not bend or drop the cardNO VALID IMAGE TO PLAY Message DisplayBUILT-IN MEMORY ERROR FORMAT BUILT-IN MEMORY? THIS MEMORY CARD IS PROTECTEDWRITE ERROR MEMORY CARD ERROR FORMAT THIS CARD?MEMORY CARD ERROR READ ERROR2 The camera cannot be operated even when it is turned on TroubleshootingCarry out the RESET in the SETUP menu. P24 ∫ Batteries and the power source4 Noise appears on the LCD monitor ∫ LCD monitor2 The screen is too bright or dark 3 Some pixels are inactive or always lit on the LCD monitor∫ TV, PC and printer 1 The picture does not appear on the television 2 When connecting to a PC, pictures cannot be transferred2 The setting for the auto review function is disabled 4 The clock setting is resetMetering mode SpecificationsPower Source Power ConsumptionFlash DimensionsWeight Operating TemperatureDigital Camera Accessory System Accessory#Description For USA Customers Digital Camera Accessory Order FormRequest for Service Notice Please include your proof of purchase Request for Service Notice For USA OnlyRECHARGEABLE BATTERY Limited Warranty For USA OnlyPanasonic Digital Still Camera Limited Warranty Limited Warranty CoverageCarry-In or Mail-In Service Service in Puerto Rico Customer Services Directory For USA OnlyCentralized Factory Servicenter MAIL TOIndex Others Numerics3 Reproduzca las imágenes Spanish Quick Use Guide/Guía rápida en español1 Inserte las baterías 2 Encienda la cámara para tomar las imágenesVQT0P65 MEMOVQT0P65 MEMOVQT0P65 MEMODivision of Panasonic Corporation of North America VQT0P65F0105Mn0 Panasonic Consumer Electronics Company