Panasonic DP-C264 Insert the SD Memory Card, Select “SD Card”, Press the Start key, remove it

Models: DP-C354 DP-C264 DP-C263 DP-C323 DP-C213

1 62
Download 62 pages 63.27 Kb
Page 11
Image 11
6Insert the SD Memory Card.

6Insert the SD Memory Card.

1Push the Slot Cover to open it.

2Insert the SD Memory Card as illustrated. (Label side up).

7Select “SD Card”.

￿Only one storage device can be selected at a time. When the “SD Card” is selected as a storage device, the scanned image cannot be saved to the PCMCIA/PC Card, or Hard Disk Drive at the same time.

￿If the setting of Function Parameter “84 SD/ PC Card Function” (General Settings > Key Operator) is set to “No”, the Confirmation screen displays an “Function not available” error message and beeps.

If you do not touch any key for 3 seconds, or

 

select “Close” on the touch panel display,

 

the machine will display the previous

Chapter

screen.

For more details, refer to General Settings

in the Operating Instructions (For Function

 

Parameters) on the provided CD-ROM.

 

8 Press the Start key.

 

Scanned image is saved in the following

 

directory of the SD Memory Card.

 

￿Directory:

2

\PRIVATE\MEIGROUP\PCC\DI\IMAGE

￿The data saved on the SD Memory Card

 

can be printed by this machine or another

Scan/Email

9 Push the SD Memory Card, and then

DP-C354, DP-C264, DP-C323, DP-C263 or

 

DP-C213. For more details, refer to Printing

 

from SD Memory Card/PC in the Operating

 

Instructions (for Basic Operations). When

 

printing PDF data, or high-compression PDF

 

data, install and set up the Memory Card

 

Print Utility. For details, refer to the Help of

 

the Memory Card Print Utility on the

 

Document Management System CD-ROM.

 

remove it.

Operations

￿Do not remove the SD Memory Card while

 

the Access Indicator is flashing.

 

10 Close the Slot Cover.

￿When canceling the operation, press the Stop key on the Control Panel, and then select “Yes” on the Touch Panel Display.

11

Page 11
Image 11
Panasonic DP-C264 Insert the SD Memory Card, Select “SD Card”, Press the Start key, Push the SD Memory Card, and then