Messages, 110 | Panasonic HDC-SD1PP manual

Others

Messages

CANNOT RECORD.	Data writing to the SD card has failed.
NO DATA.	There are no motion pictures or still pictures recorded on the SD
	card.
	If this message appears although data is recorded on the SD card,
	the condition of the card is probably not stable.
	Turn off the power and then turn it on again.
CANNOT BE USED DUE	The recording format is different so it cannot be used. Save the data
TO INCOMPATIBLE DATA.	on the SD card to a computer, then use the SD card after formatting
CANNOT RECORD -	it.
CANNOT RECORD -
INCOMPATIBLE CONTROL
DATA.
CHECK CARD.	This card is not compatible or it cannot be recognized by the unit.
THIS CARD CANNOT	An 8 MB or 16 MB SD card on which motion pictures cannot be
RECORD IN VIDEO MODE.	recorded is inserted.
CARD LOCKED.	The write protection switch on the SD Card is set to LOCK. (l 27)
NOW ACCESSING.	The data is being processed. Close the card slot cover and wait for
PLEASE DO NOT REMOVE	a while.
CARD.
CARD FULL.	The SD card is full so no further data can be recorded. Delete
	unnecessary scenes/files or insert a new SD card. (l 34, 74, 76)
CANNOT RECORD.	The maximum number of recordable scenes on 1 SD card has been
THE NUMBER OF SCENES	reached so recording is not possible. Delete unnecessary scenes or
HAS EXCEEDED THE	insert a new SD card. (l 34, 74, 76)
MAXIMUM LIMIT.
CANNOT RECORD - DATE	The number of scenes grouped together on a date has reached the
CAPACITY IS FULL.	maximum number so recording is not possible. Delete unnecessary
	scenes or insert a new SD card. (l 34, 74, 76)
CANNOT OPERATE.	The internal temperature of this unit is high so it cannot be operated.
TEMPERATURE IS HIGH.	Turn off the power, wait until the temperature falls and then turn on
PLEASE TURN OFF AND	the power again.
WAIT A WHILE.
THIS BATTERY CANNOT	Use a battery that is compatible with this unit. (l 30)
BE USED.	You are attempting to connect an AC adaptor not compatible with
	this unit. Use the supplied AC adaptor. (l 31)
	If using a Panasonic battery compatible with this unit (l 30),
	remove the battery and then insert it again. If the message appears
	even after repeating this several times, this unit needs repair.
	Detach the power and consult the dealer who you purchased this
	unit from. Do not attempt to repair it by yourself.

110

VQT1A24

Image 110

Panasonic HDC-SD1PP operating instructions Messages, 110

Contents

Operating Instructions Thank you for choosing Panasonic Safety PrecautionsThings You Should Know Equipment FCC NoteComputer or peripheral devices Declaration of Conformity Batteries AC adaptor Important Safety Instructions Precautions USE & Location Cards that you can use with this Unit Indemnity concerning recording ContentCarefully observe copyright laws Manual recording functions Quick GuideBefore recording Motion picture playback Contents Editing Quick Guide Recording still pictures Jpeg Inserting/removing an SD cardRecording motion pictures Securely close the card slot cover Select the scene to be played back Motion picture playbackStill picture Jpeg playback Press the cursor button Move the cursor button to operate Very clear high definition pictures Features of the High Definition Video CameraWhat is the AVCHD? High definition images High definition TV B Hdmi cable optional When connecting to a TV that does not have a Hdmi terminalWatching high definition images Automatic input switching Using the remote control for the TV for playbackTurning the power on and off Other linked operations AV amplifier with Hdmi terminal B Hdmi cable optional Listening in 5.1 channel surround soundInternal microphones SD Media Storage USA only Saving the data on the SD cardWhat you can do with HD Writer Important note Accessories Parts identification and handling About the cooling fan VQT1A24 ≥Use the supplied AV cable only Component terminal Component l Microphone terminal MIC Close the battery cover Battery cable coverOpen the battery cover Using grip belt Flip the belt Put your hand through the grip belt Adjust the angle of the LCD monitor as desired Using the LCD monitorUsing the remote control ≥It can open up to 90o Concerning the button-type battery Install a button-type batteryRemote control usable range Cards that you can use with this unit Handling precautions SD Speed Class Rating Class Connect the AC cable to the AC Adaptor and the AC outlet Charging the batterySetup Charging lamp Inserting/removing the battery Inserting the battery Open the battery cover Charging time Charging time and recordable timeAbout batteries that you can use for this unit Recordable time ≥The display changes as the battery capacity reduces Connecting to the AC outletAbout the remaining battery Capacity indication Recording mode l 45 Selecting a mode Turning the unit on/offHow to turn off the power Set the mode dial to OFF Playback mode l 68 To turn off the power Turning the power on and off with the LCD monitorTo turn on the power Quick start Inserting/removing an SD card To cancel Quick start≥Check that the status indicator has gone off Open the LCD monitor Concerning the SD card How to use the cursor buttonCard access lamp Basic operations Move the cursor button up, down, left or right to operate ¬ Rotate the mode dial to selectOperations during recording Manual focus Mode Focus Set the AUTO/MANUAL/FOCUS switch to ManualSet the AUTO/MANUAL/FOCUS switch to Focus Playback mode In motion picture playback Playback mode In still picture playback To exit the help mode Using the menu screenHelp mode While stopped, press the Menu button Select a menu item Operating with remote controlPress the Menu button Press the Menu button to exit the menu screen Press the cursor button to enter Selection Setting date and timeTo recharge the built-in lithium battery Changing the date and time display style Color level of the LCD monitor Switching the languageAdjusting LCD monitor Recording Before recordingBasic camera positioning Turning the AGS function on/off About auto modeAuto Ground-Directional Standby AGS Automatic white balance l Auto focus l To end the recording Rotate the mode dial to selectRecording motion pictures Record motion pictures on an SD card Recording time elapsed Screen indications in the recording modeMinute, R0min flashes red ≥Maximum number of recordable scenes with different dates ≥Recordable time using the battery l Min To record still pictures clearly Recording still pictures JpegPress the Photo Shot button fully to take the picture Control cannot be pressed halfway Card indication l Mega optical image stabilizer l Concerning the focusing areaAbout the focus indication Switching the shutter effect on/off You can add a shutter sound when recording still pictures ≥The number of recordable pictures depends Picture quality16 MB 32 MB 64 MB 128 MB Move the zoom lever Various recording functionsZoom in/out function Digital zoom function Rotate the LCD monitor towards the lens side About using the zoom microphone functionRecording yourself You can record yourself while viewing the LCD monitor To return to normal recording Backlight compensation functionFade in/fade out function Start recording. Fade MagicPix function To cancel fadingTo cancel the MagicPix function Press the recording start/stop Button To cancel the tele macro function Soft skin modeTo cancel the soft skin mode Tele macro function You can record still pictures on an SD card using the timer Self-timer recordingTo stop the timer midway through Built-in flash Red eye reduction function When the flash is not used≥This function’s default setting is Flash Auto Flash is activated and the picture will be recorded Guide line function To cancel the image stabilizer functionImage stabilizer function Wind noise reduction function To cancel the guide line functionTo cancel the wind noise reduction function Microphone level To return to automatic setting Zebra display To cancel the zebra displayTo cancel the color bar Color bar To cancel the scene mode function Scene modeSet the AUTO/MANUAL/FOCUS switch to Manual Manual recording functions To restore to the automatic adjustment Manual focus adjustmentMove the switch down and set it to Focus position When MF assist function is used White balance About the white balance sensor Manual shutter speed/aperture adjustmentAbout the black balance Adjustment Manual iris/gain adjustment To restore to automatic adjustmentManual shutter speed adjustment Set the AUTO/MANUAL/FOCUS switch to Press the cursor button Motion picture playbackSelect the scene to be played back Move the cursor button to operate Operation is possible with the remote control only Press the or 9 button on the remote control during playbackOperating with the remote Control About motion picture Compatibility Frame-by-frame playback To adjust the volumeMove the volume lever to change the volume level Press the button Repeat playback To cancel the repeat playback functionPlaying back motion pictures by date To return to playing back all the scenes Resuming the previous playback To cancel the resume playback functionStill picture Jpeg playback Select the file to be played back About still picture compatibility Deleting scenes one at a time Editing scenesDeleting scenes Protecting scenes To complete the settingsEditing Only when Select is selected in step To continue deleting other scenes Deleting files one at a time Editing still picturesDeleting still pictures Select the file to be deleted, then press the cursor button Protecting still pictures To continue deleting other files To cancel all Dpof settings Dpof settingWhat is DPOF? Number of prints set to be in Dpof is displayed Formatting an SD card ¬ Rotate the mode dial to select orFormatting Card management To display the on-screen Information on the TV With a TVPlayback on TV To watch images with a Aspect ratio on a regular TV Connect this unit and a TV with the Hdmi cable optional Connecting with a Hdmi cable optionalWhat is HDMI? Start playback on this unit About the settings when Connecting with Hdmi Hdmi output resolution Listening in 5.1 channel sound About the setting when connecting the component terminals Component Video Audio If the image or audio from this Unit is not output on the TV AV cable supplied Page Operate with the remote control for the TV To cancel EZ SyncTM Hdavi ControlTM To stop dubbing About the battery running downConnect this unit and a video device AV cable supplied ≥Insert the plugs as far as they will go Connect this unit and a printer Select the paper size setting on Paper SizeWith a printer PictBridge Select a file to be printed, then press the cursor button No frame print Select the layout setting on page LayoutWhen you stop printing halfway Frame print With a computer Before using with a computerWhat you can do with a computer Data type Can do Software used Contents on provided CD-ROM End User License Agreement Operating environment Operating environment for HD Writer Ver1.0E for SD1 MB or more 256 MB or more recommended Microsoft Windows XP Home EditionMicrosoft Windows XP Professional USB port Insert the CD-ROM into the computer InstallationInstalling HD Writer Ver1.0E for SD1 Click HD Writer Ver1.0E for SD1 Click Finish Software application uninstallationComputer must be rebooted for the application to work Select start # Connection and recognition Connection and recognition proceduresInsert the battery and connect the AC adaptor Computer Set the mode dial on the unit toAbout the computer display 100 If the driver has not been Recognized properly To disconnect USB cable safelyVerifying the unit is correctly recognized by the computer 101 102 Using HD Writer Ver1.0E for SD1Click the Copy to PC button On the computer 103 Click the Start copying buttonWriting back to an SD card If using Macintosh 104 Menus and Indications Menu list 106 Playback menus Motion picture playback Play SetupLanguage l Playback menus Still picture playback Play Setup Scene Protect l 77 Dpof SET l Menus related to Advanced and Setup 108 IndicationsRecording indications Confirmatory indications Playback indicationsPC connection indications 109 Messages 110 111 About recovery 112 Functions that cannot be used simultaneously 114 TroubleshootingUnit operations 115 116 117 118 119 When connected to another deviceWith a computer About this unit When carrying the unit, do not drop or bump itWhen you are not going to use the unit for an extended time 120 121 About the batteryAbout the AC adaptor LCD monitor About the SD cardAbout the miniSD Card 122 Causes of condensation Explanation of termsAbout condensation What to do with the lens is fogged up 124 White balanceAuto focus Specifications 125 126 127 Optional accessories 128 Accessory Order Form For USA Customers 129 Request for Service Notice USA Only 130 Limited Warranty For USA Customers 131 Customer Services Directory 132 133 Warranty For Canadian CustomersPanasonic Canada Inc Camcorder Product One 1 year, parts and labour Index 134 130 135112 Extracción de la batería Carga de la bateríaInserción de la batería Cómo encender la unidad Grabación de fotografías Jpeg Insertar/extraer una tarjeta SDGrabación de películas 137 138 Reproducción de películasReproducción de fotografías Seleccione la escena que desea reproducir 139 Panasonic Puerto Rico, Inc