Recording
To cancel the guide line function
Press the MENU button, then select [BASIC] or [PLAY SETUP] # [GUIDE LINES] # [OFF] and press the cursor button.
≥The guide lines do not appear on the images actually recorded.
Wind noise reduction function
This is for reducing the wind noise coming into the microphone when recording.
¬Rotate the mode dial to select 
.
Press the MENU button, then select [VIDEO] # [WIND CUT] # [ON] and press the cursor button.
To cancel the wind noise reduction function
Press the MENU button, then select [VIDEO] # [WIND CUT] # [OFF] and press the cursor button.
≥This function’s default setting is [ON].
≥The wind noise reduction depends on the wind strength. (The surround effect may be reduced if this function is activated in strong winds.
However, the surround effect is automatically restored when then the wind weakens.)
≥The wind noise reduction function does not work with an external microphone.
Microphone level
This is for adjusting the microphone input level.
When recording, the input level from the
¬Rotate the mode dial to select 
.
1Press the MENU button, then select [VIDEO] # [MIC LEVEL] # [SETrAGC] or [SET] and press the cursor button.
AGC: Auto Gain Control
[AUTO]: | AGC is activated, and the |
| recording level is adjusted |
| automatically. |
[SETrAGC]: The desired recording level can be
| set. AGC will also be activated to |
| reduce the amount of sound |
| distortion. |
[SET]: | AGC is not activated and so natural |
| recording can be performed. |
60
