29
VQT1A24
Setup
Inserting/removing the battery
1Open the battery cover.
Push A while sliding it.
2Insert the battery until it clicks
paying attention to the direction
of the battery.
BPush the center of the battery until it
locks.
3Close the battery cover.
1Open the battery cover.
2Remove the battery.
Move A in the direction of the arrow to
unlock it and then remove the battery.
3Close the battery cover.
Be sure to set the mode dial to OFF and check
that the status indicator is off before removing
the battery.
The battery cover opens up to 180o.
Inserting the battery
A
B
Removing the battery
CAUTION
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type recommended by the
manufacturer. Dispose of used batteries
according to the manufacturer’s instructions.
A
VQT1A24_ENG_PP.book 29 ページ 2007年1月21日 日曜日 午後1時17分