Recording
≥If the [PICT. QUALITY] is set to [ 
],
content.
≥While this unit accesses the SD card ( 
is displayed/the card access lamp is lit), do not perform the following operations. The SD card or the recorded data may be damaged.
–Turn the unit off.
–Open the card slot cover and remove the SD card.
–Operate the mode dial.
≥Other products may degrade or not playback still pictures recorded on this unit.
≥The edges of still pictures recorded on this unit with a 16:9 aspect ratio may be cut at printing. Check the printer or photo studio before printing.
ªAbout the screen indications only when the PHOTO SHOT button is pressed halfway
2.1Ｍ 750 
MEGA 
ABC D E F G H
AFlash (l 57)
BFlash level (l 58)
CRed eye reduction (l 58) D Quality of still pictures E Size of still pictures
F Remaining number of still pictures (Flashes in red when [0] appears.)
G Card indication (l 108)
H MEGA optical image stabilizer (l 59)
ªAbout the focus indication
≥The focus indication indicates the status of the auto focus.
≥The focus indication does not appear in manual focus mode.
≥Focus on a subject manually when it is not easily focused automatically.
≥You can record still pictures on the card even if the focus indication does not appear, but pictures may be recorded without being focused.
≥The focus indication does not appear or has difficulty displaying in the following cases.
–When the zoom magnification is high.
–When the unit is shaken.
–When the subject is moving.
–When the subject stands in front of a light source.
–When close subjects and far subjects are included in the same scene.
–When the scene is dark.
–When there is a bright part in the scene.
–When the scene is filled with only horizontal lines.
–When the scene lacks contrast.
–When recording motion pictures
–When the MagicPix function is used.
ªConcerning the focusing area
When there is a contrasting object ahead or behind the subject in the focus area, the subject may not be focused. If so, move the contrasting object out of the focus area.
≥Even when it is still difficult to focus, adjust the focus manually.
≥The focusing area is not displayed when the digital zoom (more than approx. 12k) is used.
49
