12
VQT1H62
ªInserting/removing an SD card
1 Set the mode dial to OFF.
2 While sliding the SD CARD/
BATTERYOPEN lever A, move the SD
card/battery cover and open it.
3 Insert/remove the SD card into/from the
card slot.
When inserting an SD card, face the label side
B in the direction shown in the illustration and
press it straight in as far as it will go.
4 Securely close the SD card/battery cover.
Securely close it until it clicks.
ªRecording motion pictures
1 Rotate the mode dial to select .
2 Open the LCD monitor.
3 Press the recording start/stop button to
start recording.
4 Press the recording start/stop button
again to pause recording.
ªRecording still pictures (JPEG images)
1 Rotate the mode dial to select .
2 Open the LCD monitor.
3 Press the PHOTO SHOT button halfway in
order to adjust the focus. (For auto focus
only)
4 Press the PHOTO SHOT button fully to
take the picture.
A1
2
B
VQT1H62_ENG_PP.book 12 ページ 2007年7月17日 火曜日 午後5時44分