Panasonic HDC-SD5PP Wind noise reduction function, Microphone level, AGC Auto Gain Control

Recording

To cancel the guide line function

Press the MENU button, then select [BASIC] or [PLAY SETUP] # [GUIDE LINES] # [OFF] and press the cursor button.

≥The guide lines do not appear on the images actually recorded.

≥The guidelines are not displayed while rotating the LCD monitor frontward to record yourself.

Wind noise reduction function

This is for reducing the wind noise coming into the microphone when recording.

¬Rotate the mode dial to select .

Press the MENU button, then select [VIDEO] # [WIND CUT] # [ON] and press the cursor button.

To cancel the wind noise reduction function

Press the MENU button, then select [VIDEO] # [WIND CUT] # [OFF] and press the cursor button.

≥This function’s default setting is [ON].

≥The wind noise reduction depends on the wind strength. (The stereo effect may be reduced if this function is activated in strong winds.

However, the stereo effect is automatically restored when then the wind weakens.)

Microphone level

This is for adjusting the microphone input level.

When recording, the input level from the built-in microphones can be adjusted.

¬Rotate the mode dial to select .

1Press the MENU button, then select [VIDEO] # [MIC LEVEL] # [SETrAGC] or [SET] and press the cursor button.

AGC: Auto Gain Control

[AUTO]:	AGC is activated, and the
	recording level is adjusted
	automatically.
[SETrAGC]:	The desired recording level can
	be set. AGC will also be
	activated to reduce the amount
	of sound distortion.
[SET]:	AGC is not activated and so
	natural recording can be
	performed.

2Move the cursor button left or right to adjust the microphone input level.

A B

C

ALeft

B Right

C Microphone input level

≥ A gain value for each of the 2 built-in microphones is displayed. (The input level of the microphones cannot be set individually.)

57

VQT1H62