Panasonic HDC-SD5PP 1, 2, 1, 2, 3

53
VQT1H62
Recording
Use this function when the light is emanating
from behind the subject and the subject appears
dark.
¬Rotate the mode dial to select .
1Press the cursor button. Then
move the cursor button down to
display the icon shown in the
illustration.
2Move the cursor button right to
select [ ].
The image on the screen will become brighter.
To return to normal recording
Select [ ] again.
≥If you turn off the power or operate the mode
dial, the backlight compensation function is
canceled.
You can record still pictures on an SD card using
the timer.
¬Rotate the mode dial to select .
1Press the cursor button. Then
move the cursor button down to
display the icon shown in the
illustration.
2Move the cursor button up to
select [Ø].
≥Each time the cursor button is pressed up, the
indication changes by one setting in the
following order: [Ø10] # [Ø2] # setting
canceled
Ø10: Records after 10 seconds
Ø2: Records after 2 seconds
3Press the PHOTO SHOT button.
A still picture is recorded after the [Ø10] or [Ø2]
display and the recording lamp flashes for the
time which has been set.
≥After recording, the self-timer is canceled.
≥If you press the PHOTO SHOT button halfway
and then fully in auto focus mode, the subject
is focused when the button is pressed halfway.
≥When you press the PHOTO SHOT button fully
in auto focus mode, the subject is focused just
before recording.
To stop the timer midway through
Press the MENU button. (The self-timer setting is
canceled.)
Backlight compensation
function
This is for preventing a backlit subject
from being darkened.
Self-timer recording
VQT1H62_ENG_PP.book 53 ページ ２００７年７月１７日 火曜日 午後５時４４分