Panasonic HDC-SD5PP Image stabilizer function, Guide line function

56
VQT1H62
Recording
Reduces the image shaking (jitter) due to hand
movement when recording.
¬Rotate the mode dial to select .
Press the MENU button, then select
[BASIC] # [O.I.S.] # [ON] and press
the cursor button.
To cancel the image stabilizer function
Press the MENU button, then select [BASIC] #
[O.I.S.] # [OFF] and press the cursor button.
≥This function’s default setting is [ON].
≥In still picture recording mode, pressing the
PHOTO SHOT button halfway increases the
effect of the image stabilizer function. (MEGA
optical image stabilizer)
≥When a tripod is used, we recommend that you
turn the image stabilizer off.
≥In the following cases, the image stabilizer
function may not work effectively.
jWhen the digital zoom is used
jWhen the unit is shaken greatly
jWhen you record a moving subject while
tracking it
jWhen the conversion lens is used
You can check if the image is level while
recording or playing back motion pictures and
still pictures. The function can also be used to
estimate the balance of the composition.
¬Rotate the mode dial to select or
rotate the mode dial to and then
select the [ ] (motion picture
playback) tab. (l64)
Press the MENU button, then select
[BASIC] or [PLAY SETUP] #
[GUIDE LINES] # desired item and
press the cursor button.
A[HORIZONTAL]
B[GRID1]
C[GRID2]
Image stabilizer function
This is for reducing image shakes
(jitter) during recording.
Guide line function
This is for viewing the slope and the
balance of the image while recording
or playing back.
VQT1H62_ENG_PP.book 56 ページ ２００７年７月１７日 火曜日 午後５時４４分