Panasonic HDC-SD5PP Tele macro function

55
VQT1H62
Recording
Reduces the phenomena where human eyes
become red from flashes.
Press the MENU button, then select
[PICTURE] # [RED EYE] # [ON] and
press the cursor button.
To cancel the red eye reduction function
Press the MENU button, then select [PICTURE]
# [RED EYE] # [OFF] and press the cursor
button.
≥The flash is activated 2 times. Do not move
until the second flash is finished.
≥Use this when you take pictures of people in
dark places.
≥Red eye phenomenon may appear depending
on the recording conditions.
Press the MENU button, then select
[PICTURE] > [FLASH LEVEL] #
desired item and press the cursor
button.
[ßj]: If the brightness is too high.
[ßd0]: In normal recording
[ßi]: If the brightness is insufficient.
By focusing only on the subject and blurring the
background, the image can be impressive.
The unit can focus on the subject at a distance of
approx. 50 cm (20q).
¬Rotate the mode dial to select .
1Press the cursor button. Then
move the cursor button down to
display the icon shown in the
illustration.
2Move the cursor button right to
select [ ].
≥If the magnification is 10k or less, then it is
automatically set to 10k.
To cancel the tele macro function
Select [ ] again.
≥If a sharper focus cannot be achieved, adjust
the focus manually. (l60)
≥In the following cases, the tele macro function
is canceled.
jThe zoom magnification becomes lower than
10k.
jThe power is turned off or the mode dial is
operated.
Red eye reduction function
To adjust the brightness of the
flash
Tele macro function
This is for close-ups bringing only
what you want to record into focus.
VQT1H62_ENG_PP.book 55 ページ ２００７年７月１７日 火曜日 午後５時４４分