With other products
84
VQT1H62

ªAbout the time it takes to copy

The time it takes to copy differs depending on the number of scenes recorded on the SD card, the type
of disc etc. Also, it takes time to automatically check the copied data. For this reason, it may take longer
to copy than the recording time on the SD card.
It takes even longer to copy to DVD-R DL than other discs because there are two layers of recording
surface on one side.

¬Connect the AC adaptor supplied with the DVD burner to the DVD burner. (You

cannot supply power to the DVD burner from this unit.)

Please read the operating instructions of the DVD burner for how to use it.
1Connect this unit to the AC adaptor.
If a battery is used, operation is not possible when this unit is connected to a DVD burner.
2Set the mode dial to to turn on the power.
3Connect this unit to the DVD burner.
AMini AB USB Connection Cable (supplied with the DVD burner)
BDVD burner (optional)
Connect the Mini A terminal to this unit and the Mini B terminal to the DVD burner.
Insert the plugs as far as they will go.
[ ] (disc playback) tab C appears.
If [ ] (disc playback) tab does not appear even when the DVD burner
is connected, disconnect and then reconnect the Mini AB USB
Connection Cable.
“PLEASE CHECK EXTERNAL DRIVE OR DISC.” appears when a disc
is not inserted in the DVD burner.
4Insert the disc in the DVD burner.
Mini A Mini B
A
B
C
VQT1H62_ENG_PP.book 84 ページ 2007年7月17日 火曜日 午後5時44分