[QUICK POWER ON] | [OFF]/[ON] |
The unit is put into recording pause approx. 1 second when the power is turned on with the
mode set to 
or 
.
≥Depending on the recording conditions, start time may be longer than 1 second in Still Picture Recording Mode.
≥In the Quick power on mode, the zoom magnification becomes 1k.
[QUICK START] | [OFF]/[ON] |
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened.
≥When in Quick start standby mode about 80% of the power used in Recording pause mode is being consumed, so the recording time will be reduced.
≥Start time will not shorten if there is no SD card inserted.
/ 
Start time will be shortened if the
Start time will be shortened if the [HDD] is selected in the [MEDIA SELECT], even if there is no SD card inserted.
≥Change the mode to 
or 
. 1 Set [QUICK START] to [ON].
2 Close the LCD monitor while the mode is set |
| ||
to | or | . | |
The status indicator A flashes green and the unit goes into Quick start standby mode.
≥The lens cover does not close.
3 Open the LCD monitor.
The status indicator A lights red and the unit is put into |
|
recording pause. | |
≥Quick start standby mode is canceled if jabout 5 minutes have elapsed
jmode is set to 
≥Depending on the recording conditions, time for Quick Start may be more than 0.6 seconds slower in Still Picture Recording Mode.
≥It may take some time for Automatic white balance to adjust.
≥In the Quick Start Mode, the zoom magnification becomes 1k.
≥If [ECONOMY] (l 45) is set to [5 MINUTES] and the unit automatically goes into Quick Start Standby Mode, close the LCD monitor and then open it again.
≥Turn the unit off using the power button.
46
VQT2M51
