With a PC

Setup

2 Connecting to a PC

 

Connect this unit to the PC after the software applications are installed.

Remove the supplied CD-ROM from your PC.

AUSB cable (supplied)

1 Connect this unit to the AC adaptor.

It is possible to use the unit connected to the PC with the batteries only, but you will not be able to write data into the unit.

Connect with the AC adaptor when using the Conversion Assist Function.

2 Turn on the unit.

This function is available in all modes.

3 Connect this unit to a PC.

Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any other USB cables.)

When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen to turn the LCD monitor on.

The Smart wizard screen is automatically displayed when HD Writer AE 2.0 is installed.

This unit is automatically recognized as an external drive of the PC. (l 119)

When HD Writer AE 2.0 is not installed, a USB function selection screen will appear. Touch [PC]. When you select an option other than [PC], reconnect the USB cable.

When using an SDXC Memory Card, check the following support site. http://panasonic.net/avc/sdcard/information/SDXC.html

117

VQT2M51

Page 117
Image 117
Panasonic HDC-TM60P/PC, HDC-SD60P/PC Connecting to a PC, Connect this unit to the AC adaptor, Turn on the unit, 117