Panasonic HDC-TM60P/PC Card Status, Media Status, Touch Calibration, ≥ Touch Enter

[CARD STATUS]

The amount of space left on the SD card can be checked.

(Only when the mode is at the position)

≥Touch [EXIT] or press the MENU button to close the indication.

/ /

[MEDIA STATUS]

The amount of space left on the SD card, the built-in memory and HDD can be checked.

(Only when the mode is at the position)

≥Touching [CHANGE MEDIA] switches the unit between the display for the SD card and the display for the built-in memory/HDD.

≥Touch [EXIT] or press the MENU button to close the indication.

≥The SD card, built-in memory or built-in HDD requires some space to store information and manage system files, so the actual usable space is slightly less than the indicated value. The usable built-in memory/HDD space is generally calculated as 1 GB=1,000,000,000 bytes. The capacities of this unit, PCs and software are expressed as

1 GB=1,024k1,024k1,024=1,073,741,824 bytes. Therefore, the indicated value of the capacity appears to be smaller.

[CALIBRATION]

Perform the touch screen calibration if a different object to the one touched is selected.

1Touch [CALIBRATION].

≥ Touch [ENTER].

2Touch the [_] that appears on the screen with the supplied stylus pen.

≥ Touch [_] in sequence (up left # down left # down right # up right # center).

3Touch [ENTER].

≥Calibration cannot be performed when the LCD monitor is turned 180o.

49

VQT2M51