12
VQT1Y59
11 Zoom buttons (l55)
≥These buttons function in the same manner as
the zoom lever. Changing the thumbnail
display and adjusting the volume can be
operated.
12 Menu button [MENU] (l27)
13 Delete button [ ] (l85)
14 SD card open lever [OPEN] (l23)
15 Audio-video output terminal [A/V]
(l95, 110)
≥Use the AV cable (only the supplied cable).
16 Component terminal [COMPONENT]
(l95)
17 HDMI mini connector [HDMI] (l95, 100)
18 Access lamp [ACCESS] (l9, 23)
19 Card slot (l23)
20 SD card cover (l23)
21 Built-in flash (l60)
22 Lens (LEICA DICOMAR)
23 Lens hood
Rotate the lens hood counter-clockwise A to
remove it. In order to attach it, place into slot B,
and then rotate it clockwise C.
≥Attach the MC protector or the ND filter of the
Filter Kit (VW-LF43NE; optional) in front of the
lens hood.
≥When fitting the tele conversion lens
(VW-T4314H; optional) or the wide conversion
lens (VW-W4307H; optional), first remove the
lens hood.
24 Remote control sensor (l38)
25 Recording lamp (l29)
26 AF assist lamp (l69)
Lens cover A
≥The lens cover opens in
motion picture
recording mode or still
picture recording mode.
(l24)
21 2223242526Be careful about the following.
When 2 lens accessories, such as the ND filter
and tele conversion lens, are fitted and the
zoom lever is pressed toward the W side, the
4 corners of an image will be darkened.
(Vignetting)
(When fitting 2 lens accessories, first remove
the lens hood and then fit them.)
Attaching the lens cap
(Included in the Filter Kit
(VW-LF43NE; optional))
≥When the filter kit (VW-LF43NE; optional) is
used, protect the lens surface while the unit
is not used with the lens cap supplied with
the filter kit.
≥To attach or remove the lens cap, hold both
sides of the lens cap with the tips of your
finger and thumb.
HDCTM200&HS200GN-VQT1Y59_mst.book 12 ページ 2009年1月15日 木曜日 午後7時32分