121
VQT1Y59
With a PC
Setup 2Connecting to a PC
≥Connect this unit to the PC after the software applications are installed.
≥Remove the supplied CD-ROM from your PC.
AUSB cable (supplied)
1Connect this unit to the AC
adaptor.
≥It is possible to use it connected to the PC with
the batteries only, but you will not be able to
write data into the unit.
2Turn on the unit.
≥This function is available in all modes.
3Connect this unit to a PC.
The USB function selection screen will appear.
≥Insert the USB connectors as far as they will
go.
≥Do not use any other USB cables except the
supplied one. (Operation is not guaranteed
with any other USB cables.)
4Touch [PC].
≥
This unit is automatically recognised as an
external drive of the PC. (
l
123)
≥When the unit is connected to a PC its
power cannot be turned off.
Disconnect the USB cable, before turning
this unit off.
≥Do not disconnect the USB cable or the AC
adaptor while the access lamp is on or card
access icon ( ) appears on the unit screen.
≥
Do not disconnect the USB cable or the AC
adaptor while the access lamp is on or Built-in
memory access icon ( ) appears on the unit
screen.
≥
Do not disconnect the USB cable or the AC
adaptor while the HDD access lamp is on or
HDD access icon ( ) appears on the unit
screen.
HDCTM200&HS200GN-VQT1Y59_mst.book 121 ページ ２００９年１月１５日 木曜日 午後７時３２分