138
VQT1Y59
If scenes do not change smoothly when played back on an other device
The images may be still for several seconds at the joins between the scenes if the following operations
are performed when multiple scenes have been continuously played back using another unit.
Just how smoothly the scenes will be played back depends on the playback unit. Depending on the
unit used, the images may stop moving and become still for a moment even when none of the
following conditions are applicable.
It may not play back smoothly when the editing of scenes was done with the HD Writer AE 1.0, but it
will play back smoothly if you set [Seamless settings] in the HD Writer AE 1.0. Refer to the operating
instructions for the HD Writer AE 1.0.
When the scenes were recorded on different da tes
AThe image will be still for several seconds wherever the date changes.
BThe images are played back smoothly if the scenes were recorded on the same date.
When scenes lasting under 3 seconds have been recorded
13 or more seconds
2Under 3 seconds
AThe image will be still for several seconds after a scene which lasts under 3 seconds.
When PRE-REC was used for recording
1Normal recording
2PRE-REC recording
AThe picture momentarily stops at the end of the last scene that was recorded normally before
PRE-REC recording.
1.1.2010 2.1.2010 3.1.2010
HDCTM200&HS200GN-VQT1Y59_mst.book 138 ページ 2009年1月15日 木曜日 午後7時32分