26
VQT1Y59
Preparation
Setup 4How to use the touch screen
You can operate by directly touching the LCD monitor (touch screen) with your finger.
It is easier to use the stylus pen (supplied) for detailed operation or if it is hard to operate with your fingers.
∫Touch
Touch and release the touch screen to select
icon or picture.
≥Touch the centre of the icon.
≥Touching the touch screen will not operate
while you are touching another part of the
touch screen.
∫About the Stylus pen
The stylus pen (supplied) can be stored on the
unit as shown when it is not being used. Remove
the stylus pen from the unit when it is to be used.
≥Only use the supplied stylus pen.
≥Do not tuck the stylus pen with the LCD
monitor.
∫About the operation icons
///:
These icons are used to switch the menu and
thumbnail display page, for item selection
and setting etc.
:
Touch to return to the previous screen such
as when setting menus
≥Wipe the LCD monitor with a soft cloth, such
as eye glass cleaner, when it gets dirty with
finger prints and others.
≥Do not touch the LCD monitor with hard
pointed tips, such as ball point pens.
≥Do not touch the LCD monitor with your finger
nails, or rub or press with strong force.
≥It may become hard to see or hard to
recognise the touch when the LCD protection
sheet is affixed.
≥Perform the touch screen calibration when the
touch is not recognised or wrong location is
recognised. (l36)
HDCTM200&HS200GN-VQT1Y59_mst.book 26 ページ ２００９年１月１５日　木曜日　午後７時３２分