Manuals / Brands / Photography / Camcorder / Panasonic / Photography / Camcorder

Panasonic HDC-HS200, HDC-TM200 AF assist lamp , Shutter sound

1 148

Download 148 pages, 37.84 Mb

69

VQT1Y59

Scene mode:

5Sports

≥During normal playback, the image movement

may not look smooth.

≥Colour and screen brightness may change

under indoor lighting.

≥If the brightness is insufficient, the sports mode

does not function. The / display

flashes.

≥The shutter speed is 1/6 or more in still picture

recording mode.

Portrait

≥Colour and screen brightness may change

under indoor lighting.

≥The shutter speed is 1/6 or more in still picture

recording mode.

Spotlight

≥The shutter speed is 1/6 or more in still picture

recording mode.

Snow

≥The shutter speed is 1/6 or more in still picture

recording mode.

Beach

≥The shutter speed is 1/6 or more in still picture

recording mode.

Sunset

≥The shutter speed is 1/25 or more.

≥Image may get blurry when close object is

recorded.

≥The shutter speed is 1/6 or more in still picture

recording mode.

Fireworks

≥The shutter speed is 1/25.

≥Image may get blurry when close object is

recorded.

≥Image may get washed out when recorded in

bright surrounding.

Scenery

≥Image may get blurry when close object is

recorded.

≥The shutter speed is 1/6 or more in still picture

recording mode.

Low light

≥The shutter speed is 1/25 or more.

Night scenery

≥The shutter speed is 1/2 or more.

≥Image may get blurry when close object is

recorded.

≥It is recommended using a tripod.

Night portrait

≥The shutter speed is 1/2 or more.

≥The flash is set to [ON].

≥It is recommended using a tripod.

Function Effect/Setting method

AF assist lamp Illuminating the subject makes it easier for the camera to focus

when recording in low light conditions that make focusing

difficult.

≥Change the mode to .

≥The intelligent auto mode is set to off. (l40)

Select the menu. (l27)

[PICTURE] # [AF ASSIST LAMP] # [AUTO]

≥This function’s default setting is [AUTO].

≥The available distance of the AF assist lamp is approx. 1.5 m.

Shutter sound You can add a shutter sound when recording still pictures.

≥Change the mode to or .

Select the menu. (l27)

[PICTURE] # [SHTR SOUND] # [ON]

≥This function’s default setting is [ON].

VQT1Y59~Body1_mst.fm 69 ページ２００９年１月１９日　月曜日　午後７時５３分

Contents

Main Information for Your Safety WARNING: CAUTION! Warning content Carefully observe copyright laws Cards that you can use with this unit For the purposes of these operating instructions Licenses Contents Preparation Before using Setup Recording Playback Editing With a TV Backup With other products Accessories Optional accessories Features Very clear high definition pictures What is the AVCHD? Compatibility with other products disk drive) Back up data periodically. Access lamp [ACCESS] A Indemnity about recorded content Handling of built-in memory Handling of HDD handling Lens cover A 21 22 23 24 2526 Attaching the lens cap (Included in the Filter Kit (VW-LF43NE; optional)) Page Page Lens cover A 22 23 24 25 2627 Attaching the lens cap (Included in the Filter Kit (VW-LF43NE; optional)) Page About batteries that you can use with this unit 1 2 Charging the battery Charging lamp [CHARGE] A Install the battery by inserting it in the direction shown in the figure. Inserting/removing the battery Removing the battery CAUTION Charging and recording time Battery capacity indication 1 2 3 Connecting to the AC outlet DC IN Cards that you can use with this unit 1 2 sliding the OPEN lever B. 3 4 (Turning the unit on/off) Turn on the power by changing the mode to , or while pressing the lock release button A. To turn off the power To turn on the power HDC-TM200 HDC-HS200 To turn off the power Turning the power on and off with the LCD monitor HDC-TM200 HDC-HS200 Touch About the Stylus pen About the operation icons 1 2 3 4 5 1 2 Motion picture recording mode Language selection Menu list RECORD SETUP PICTURE MEDIA SELECT SETUP Still picture recording mode RECORD SETUP PICTURE Playback mode ([ ] motion picture playback) ([ ] still picture playback) VIDEO SETUP EDIT SCENE 2 then set the desired value using /. 3 Page 2 Touch [HOME]. 3 Touch / to select your home region and touch [ENTER]. 4 2 3 LCD monitor adjustment 2 stylus pen and enter in calibration. 3 Rotate the LCD monitor towards the lens side. Touch screen calibration control CAUTION Replace a button-type battery Remote control usable range 1 2 button. 3 pressing the OK button. Basic camera positioning Intelligent auto mode Intelligent auto button When Intelligent auto mode is set to off: Automatic white balan ce Auto focus 2 mode is set to or . Quick start 3 1 Select SD card as a media to record from the menu. (l27) Quick power on 2 3 HDC-TM200 4 5 Recording modes/approximate recordable time Back up data periodically. 1 2 button to start recording. PRE-REC This prevents you missing a shot. 2 3 the menu. (l44) 4 (For auto focus only) Focus indication: 5 R3000R3000R3000 About the screen indications in still picture recording About the focus indication About the focusing area Aspect ratio/picture size Picture quality 1 2 Recording still pictures in motion picture recording mode Number of recordable pictures Page Page Extra optical zoom mechanism Zoom lever/Zoom buttons Digital zoom function Extra optical zoom function Optical image stabilizer button 2 Touch the object and lock the target. 3 About target frame operation icons 1 operation icons on the screen. 2 Select an operation icon. Backlight compensation Intelligent contrast control Intelligent exposure Fade Soft skin mode Tele macro Self-timer This is for recording still pictures using the timer. Built-in flash Red eye reduction Page menus Scene mode Guide line Digital cinema Relay recording Anti-Ground- Shooting (AGS) Auto slow shutter Automatic face framing Digital cinema colour Wind noise reduction Microphone setup Microphone level 2 level. 3 input level and then touch [EXIT]. Hi-speed burst shooting 2 3 4 Touch [REC ALL] or [SELECT]. 5 AF assist lamp Shutter sound Page Press the MANUAL button. Perform the setting by touching the desired item to be set. MANUAL 1 2 balance mode. To set the white balance manually White balance 1 2 Manual shutter speed/iris adju stment 1 2 3 . 2 2 3 4 touching the operation icon. Change the thumbnail display Speaker volume adjustment Fast forward/rewind playback Frame-by-frame playback Direct playback Motion picture compatibility 1 Highlight&Time frame index save as a still picture during playback. 2 1 2 3 Creating still picture from motion picture 1 Intelligent scene selection 2 3 2 3 4 5 (l75) Scene setting Highlight playback Repeat playback Resuming the previous playback 2 3 4 touching the operation icon. Change the thumbnail display Changing the playback settings for the slide show 1 2 3 played back. Still picture compatibility 1 2 3 4 Page 1 3 4 5 6 pictures Change the mode to . 2 be protected. Change the mode to and touch the play mode select icon to select [PICTURE/ SD CARD]. (l82) 2 3 prints. Memory/HDD Media information disp lay Confirming remaining capacity on the copy destination 3 4 5 Touch the scene/still picture to be copied. Copying 6 Touch [Enter]/[ENTER]. 7 appears, touch [YES]. 8 1 3 4 Change the mode to , or , and select desired media to be formatted. (l44, 48, 75) your TV 1 2 3 If the image or audio from this unit does not appear on the TV To display the on-screen information on the TV Connecting with a HDMI mini cable Listening in 5.1 channel sound Connecting with the component cable (HDAVI Control) Change the mode to . 2 HDMI mini cable. 3 Other linked operations Backup copy to/play back a disc About discs that can be used for copying Preparing for copying/playing back We recommend using Panasonic DVD burner VW-BN1. Page 1 Copying to discs 2 3 4 5 6 Touch the scene you want to copy. Touch the date you want to copy. 7 Important Notice About the approximate time it takes for copying to a disc 1 2 Playing back the copied disc Formatting discs Auto protect 2 Displaying disc information Managing the copied disc (Formatting, Auto protect, Displaying disc information) video device 1 2 3 Backup 1 2 3 4 5 6 7 8 paper size setting. 9 the desired layout setting. 10 Page To use the HD Writer AE 1.0 Important Notice End User License Agreement Operating environment for HD Writer AE 1.0 for HDC Operating environment for the card reader function (mass storage) 1 2 3 4 5 6 7 8 1 2 1 adaptor. 2 3 4 If the driver has not been recognised properly To disconnect USB cable safely Copying your still pictures to your PC About the PC display Reading the operating instructions of the software applications 1 2 3 4 Recording indications R 1h20m 1h30m R 3000 / 1 Page Playback indications PC connection indications Confirmatory indications Confirmatory indications when a DVD burner is connected Page About recovery used simultaneously Page Page Page Page Page Page If scenes do not change smoothly when played back on an other device When the scenes were recorded on different da tes When scenes lasting under 3 seconds have been recorded When PRE-REC was used for recording Page Cautions for use About this unit About the battery About the AC adaptor LCD monitor Causes of condensation About condensation Specifications