60
VQT1Y59
Function Effect
Self-timer This is for recording still pictures using the timer.
Each time the icon is selected, the indication changes by one
setting in the following order:
Ø10 # Ø2 # setting cancelled
Ø10: Records after 10 seconds
Ø2: Records after 2 seconds
≥In motion picture recording mode, set this function from the
menu.
≥When the button is pressed, a still picture is recorded after
the Ø10 or Ø2 display and the recording lamp flashes for the
time which has been set.
≥After recording, the self-timer is cancelled.
≥In auto focus mode, if the button is pressed halfway once
and then fully, the lens focuses on the subject when the button
is pressed halfway.
≥If the button is pressed fully all at once, the lens focuses
on the subject just before recording.
To stop the timer midway through
Press the MENU button.
Built-in flash When the button is pressed, the flash is activated and
the picture will be recorded. Use the built-in flash in order to
record still pictures in dark places.
Each time the ß icon is selected, the indication changes by one
setting in the following order:
ß # ßA #
ß:ON
ßA: AUTO
:OFF
≥In motion picture recording mode, set this function from the
menu.
≥This function’s default setting is ßA.
≥When the button is pressed halfway, the flash indicator will
appear.
≥The unit automatically determines if the flash is necessary
even when it has been set to by detecting the ambient
brightness. (If it determines that the flash is necessary, the
indication lights up in red when the button is pressed
halfway.)
∫To adjust the brightness of the flash
≥The intelligent auto mode is set to off in motion picture
recording mode. (l40)
Select the menu. (l27)
[PICTURE] # [FLASH LEVEL] # desired setting
[ßj]: Less brighter
[ßd0]: Normal
[ßi]: Much brighter
Red eye reduction Reduces the phenomena where human eyes become red
from flashes.
≥
In motion picture recording mode, set this function from the menu.
HDCTM200&HS200GN-VQT1Y59_mst.book 60 ページ ２００９年１月１５日　木曜日　午後７時３２分