36
VQT1Y59
Perform the touch screen calibration if a different
object to the one touched is selected.
1Select the menu. (l27)
≥Touch [ENTER].
2Touch [r] with the supplied
stylus pen and enter in
calibration.
≥Touch the [i] in the order it is displayed.
(5 locations)
3Touch [ENTER].
≥Calibration cannot be performed when the LCD
monitor is turned 180o.
≥The intelligent auto mode is set to off.
(l40)
Select the menu. (l27)
[DYNAMIC]:
The image on the LCD monitor becomes clear
and vivid. Optimum contrast and brightness are
set depending on the scenes recorded. Clear
and brilliant images are presented.
[NORMAL]:
Switches to the standard picture quality.
≥When the [POWER LCD] is set to or ,
it is set to [DYNAMIC], or when the [POWER
LCD] is set to or , it is set to
[NORMAL], and the setting cannot be
changed.
¬Change the mode to or .
Rotate the LCD monitor towards the
lens side.
≥The image is horizontally flipped as if you see
a mirror image. (However the image recorded
is the same as a normal recording.)
≥Only some indications will appear on the
screen. When ° appears, return the direction
of the LCD monitor to normal position and
check the warning/alarm indication. (l129)
Touch screen calibration
[SETUP] # [CALIBRATION] # [YES]
Changing the picture quality
on the LCD monitor
[SETUP] # [LCD AI] # [DYNAMIC] or
[NORMAL]
Recording Yourself
+1
+2
-
1
A
HDCTM200&HS200GN-VQT1Y59_mst.book 36 ページ 2009年1月15日 木曜日 午後7時32分