Panasonic HDC-HS200, HDC-TM200 - page 136

136

VQT1Y59

If the SD card is inserted

in another device, it is not

recognised.

≥Check that the device is compatible with the capacity or type

of SD card (SD Memory Card/SDHC Memory Card) that you

inserted. Refer to the operating instructions of the device for

details.

Colour or brightness of

the image changes, or

you may see horizontal

bars in the image.

The LCD monitor flickers

indoors.

(In motion picture recording mode)

≥Colour or brightness of the image may change, or you may

see horizontal bars in the image when the object is recorded

under fluorescent light, mercury light or sodium light, etc.,

but this is not a malfunction. Record in auto mode or set the

shutter speed to 1/100 in areas where the power supply

frequency is 50 Hz, or 1/125 in areas of 60 Hz.

(In still picture recording mode)

≥This is a characteristics of the MOS sensor, which is the

imaging device of the unit. This is not a malfunction. This

will not affect the recorded image.

Object seems to be

warped.

≥Object seems to be warped slightly when the object moves

across the image very fast, but this is because the unit is

using MOS for the image sensor. This is not a malfunction.

White round spots like

soap bubbles appear on

the recorded picture.

≥If you take a picture with the

flash in a dark place or indoors,

white round spots may appear

on the picture caused by the

flash reflecting of particles of

dust in the air. This is not a

malfunction.

A characteristic of this is that the number of round spots and

their position differ in every picture.

“ERROR OCCURRED.

PLEASE TURN UNIT OFF,

THEN TURN ON AGAIN.”

is displayed.

≥The unit has automatically detected an error. Restart the

unit by turning off and on the power.

≥The power will be turned off in about 1 minute if the power is

not turned off and on.

≥Repair is needed if it is repeatedly displayed even if it is

restarted. Detach the power connected, and consult the

dealer who you purchased this unit from. Do not attempt to

repair the unit by yourself.

Problem Check points

HDCTM200&HS200GN-VQT1Y59_mst.book 136 ページ２００９年１月１５日　木曜日　午後７時３２分

Contents

Main Information for Your Safety WARNING: CAUTION! Warning content Carefully observe copyright laws Cards that you can use with this unit For the purposes of these operating instructions Licenses Contents Preparation Before using Setup Recording Playback Editing With a TV Backup With other products Accessories Optional accessories Features Very clear high definition pictures What is the AVCHD? Compatibility with other products disk drive) Back up data periodically. Access lamp [ACCESS] A Indemnity about recorded content Handling of built-in memory Handling of HDD handling Lens cover A 21 22 23 24 2526 Attaching the lens cap (Included in the Filter Kit (VW-LF43NE; optional)) Page Page Lens cover A 22 23 24 25 2627 Attaching the lens cap (Included in the Filter Kit (VW-LF43NE; optional)) Page About batteries that you can use with this unit 1 2 Charging the battery Charging lamp [CHARGE] A Install the battery by inserting it in the direction shown in the figure. Inserting/removing the battery Removing the battery CAUTION Charging and recording time Battery capacity indication 1 2 3 Connecting to the AC outlet DC IN Cards that you can use with this unit 1 2 sliding the OPEN lever B. 3 4 (Turning the unit on/off) Turn on the power by changing the mode to , or while pressing the lock release button A. To turn off the power To turn on the power HDC-TM200 HDC-HS200 To turn off the power Turning the power on and off with the LCD monitor HDC-TM200 HDC-HS200 Touch About the Stylus pen About the operation icons 1 2 3 4 5 1 2 Motion picture recording mode Language selection Menu list RECORD SETUP PICTURE MEDIA SELECT SETUP Still picture recording mode RECORD SETUP PICTURE Playback mode ([ ] motion picture playback) ([ ] still picture playback) VIDEO SETUP EDIT SCENE 2 then set the desired value using /. 3 Page 2 Touch [HOME]. 3 Touch / to select your home region and touch [ENTER]. 4 2 3 LCD monitor adjustment 2 stylus pen and enter in calibration. 3 Rotate the LCD monitor towards the lens side. Touch screen calibration control CAUTION Replace a button-type battery Remote control usable range 1 2 button. 3 pressing the OK button. Basic camera positioning Intelligent auto mode Intelligent auto button When Intelligent auto mode is set to off: Automatic white balan ce Auto focus 2 mode is set to or . Quick start 3 1 Select SD card as a media to record from the menu. (l27) Quick power on 2 3 HDC-TM200 4 5 Recording modes/approximate recordable time Back up data periodically. 1 2 button to start recording. PRE-REC This prevents you missing a shot. 2 3 the menu. (l44) 4 (For auto focus only) Focus indication: 5 R3000R3000R3000 About the screen indications in still picture recording About the focus indication About the focusing area Aspect ratio/picture size Picture quality 1 2 Recording still pictures in motion picture recording mode Number of recordable pictures Page Page Extra optical zoom mechanism Zoom lever/Zoom buttons Digital zoom function Extra optical zoom function Optical image stabilizer button 2 Touch the object and lock the target. 3 About target frame operation icons 1 operation icons on the screen. 2 Select an operation icon. Backlight compensation Intelligent contrast control Intelligent exposure Fade Soft skin mode Tele macro Self-timer This is for recording still pictures using the timer. Built-in flash Red eye reduction Page menus Scene mode Guide line Digital cinema Relay recording Anti-Ground- Shooting (AGS) Auto slow shutter Automatic face framing Digital cinema colour Wind noise reduction Microphone setup Microphone level 2 level. 3 input level and then touch [EXIT]. Hi-speed burst shooting 2 3 4 Touch [REC ALL] or [SELECT]. 5 AF assist lamp Shutter sound Page Press the MANUAL button. Perform the setting by touching the desired item to be set. MANUAL 1 2 balance mode. To set the white balance manually White balance 1 2 Manual shutter speed/iris adju stment 1 2 3 . 2 2 3 4 touching the operation icon. Change the thumbnail display Speaker volume adjustment Fast forward/rewind playback Frame-by-frame playback Direct playback Motion picture compatibility 1 Highlight&Time frame index save as a still picture during playback. 2 1 2 3 Creating still picture from motion picture 1 Intelligent scene selection 2 3 2 3 4 5 (l75) Scene setting Highlight playback Repeat playback Resuming the previous playback 2 3 4 touching the operation icon. Change the thumbnail display Changing the playback settings for the slide show 1 2 3 played back. Still picture compatibility 1 2 3 4 Page 1 3 4 5 6 pictures Change the mode to . 2 be protected. Change the mode to and touch the play mode select icon to select [PICTURE/ SD CARD]. (l82) 2 3 prints. Memory/HDD Media information disp lay Confirming remaining capacity on the copy destination 3 4 5 Touch the scene/still picture to be copied. Copying 6 Touch [Enter]/[ENTER]. 7 appears, touch [YES]. 8 1 3 4 Change the mode to , or , and select desired media to be formatted. (l44, 48, 75) your TV 1 2 3 If the image or audio from this unit does not appear on the TV To display the on-screen information on the TV Connecting with a HDMI mini cable Listening in 5.1 channel sound Connecting with the component cable (HDAVI Control) Change the mode to . 2 HDMI mini cable. 3 Other linked operations Backup copy to/play back a disc About discs that can be used for copying Preparing for copying/playing back We recommend using Panasonic DVD burner VW-BN1. Page 1 Copying to discs 2 3 4 5 6 Touch the scene you want to copy. Touch the date you want to copy. 7 Important Notice About the approximate time it takes for copying to a disc 1 2 Playing back the copied disc Formatting discs Auto protect 2 Displaying disc information Managing the copied disc (Formatting, Auto protect, Displaying disc information) video device 1 2 3 Backup 1 2 3 4 5 6 7 8 paper size setting. 9 the desired layout setting. 10 Page To use the HD Writer AE 1.0 Important Notice End User License Agreement Operating environment for HD Writer AE 1.0 for HDC Operating environment for the card reader function (mass storage) 1 2 3 4 5 6 7 8 1 2 1 adaptor. 2 3 4 If the driver has not been recognised properly To disconnect USB cable safely Copying your still pictures to your PC About the PC display Reading the operating instructions of the software applications 1 2 3 4 Recording indications R 1h20m 1h30m R 3000 / 1 Page Playback indications PC connection indications Confirmatory indications Confirmatory indications when a DVD burner is connected Page About recovery used simultaneously Page Page Page Page Page Page If scenes do not change smoothly when played back on an other device When the scenes were recorded on different da tes When scenes lasting under 3 seconds have been recorded When PRE-REC was used for recording Page Cautions for use About this unit About the battery About the AC adaptor LCD monitor Causes of condensation About condensation Specifications