64
VQT1Y59
Function Effect/Setting method
Relay recordingIt is possible to continuously record motion picture to an SD
card when there is no space available in the built-in memory.
≥Change the mode to .
Select the menu. (l27)
[RECORD SETUP] # [RELAY REC] # [ON]
≥ is displayed on the screen. will disappear when space
in the built-in memory is gone and the recording to the SD card
starts.
≥It allows to record only to SD card from built-in memory.
≥Relay recording can only be performed once.
≥Combine the scenes that were relay recorded using the
[RELAY SCENE COMBINE] into the SD card. (l93)
≥Once the relay recorded scene and the scene that was recorded
on the SD card after that are combined into the SD card using the
[RELAY SCENE COMBINE], it will be possible to perform the
relay recording again. If the [RELAY REC] is set to [ON] without
performing the [RELAY SCENE COMBINE], a message is
displayed. You will be able to perform relay recording by touching
[YES], but you will not be able to perform the [RELAY SCENE
COMBINE] after that.
Anti-Ground-Shooting (AGS)If the unit continues to be tilted upside down from the normal
horizontal position while recording motion pictures, it is
automatically put into recording pause.
≥Change the mode to .
Select the menu. (l27)
[RECORD SETUP] # [AGS] # [ON]
Auto slow shutter You can record bright pictures even in dark places by slowing
the shutter speed.
≥Change the mode to .
≥The intelligent auto mode is set to off. (l40)
Select the menu. (l27)
[RECORD SETUP] # [AUTO SLOW SHTR] # [ON]
≥The shutter speed is set to 1/25 or more depending on the
surrounding brightness.
HDCTM200&HS200GN-VQT1Y59_mst.book 64 ページ 2009年1月15日 木曜日 午後7時32分