Panasonic KX-FLB756E manual Sending a fax using one-touch dial and navigator directory

Sending Faxes

Sending a fax using one-touch dial and navigator directory!

Before using this feature, program the desired names and telephone numbers into one-touch dial and navigator directory (p. 26, 27).

1	Adjust the width of the document guides to
	the size of the document.
2	Insert the document (up to 15 pages) FACE
	DOWN into the feeder until the unit grasps
	the document and a single beep is heard.
	● Confirm that there are no documents on
	the scanner glass.
	Display:	STANDARD

	If necessary, press u
3 repeatedly to select the desired setting
	(p. 34).
4	Enter the fax number.
	Using stations 1–6:

Press the desired station key.

Using stations 7–12:

Press o, then press the desired station key.

Using navigator directory:

Press (or ), then press +or -to display the desired entry.

●For further details about using the directory, see page 29.

5 Press i.

Document guides

Station keys

FACEDOWN

LOWER	RESOLUTION
	SCAN FAX START
	STOP

Note:

●Do not open the document cover when sending a fax with the auto document feeder.

To send a fax using the scanner glass

●Confirm that there are no documents in the auto document feeder.

1.Open the document cover.

2.Place the document FACE DOWN, then close the document cover.

3.Enter the fax number (see step 4 above).

●To send a single page, skip to step 7.

●To send multiple pages, go to the next step.

4.Press êto scan the document into memory.

5.Place the next page.

6.Press ê.

●To send more pages, repeat steps 5 and 6.

7.Press i.

Fax auto redial

If the line is busy or if there is no answer, the unit will automatically redial the number up to 5 times.

●This feature is also available for delayed transmission (feature #25 on page 63).

●During redial, the following will be displayed. Display: AWAITING REDIAL

●To cancel redialling, press {.

If your unit does not send a fax

●Confirm the stored telephone number on the display and check that the number dialled is answered by the other party’s machine (p. 29).

●The connecting tone will be heard during dialling to tell you the status of the other party’s machine (feature #76 on page 65).

37