Panasonic KX-FLB756E manual Installing Multi-Function Station software

Setup (PC)

Installing Multi-Function Station software!

1	Connect the fax machine to the PC
	(page 50).
	● To use via USB connection, you
	must set the cable type to “USB”
	(feature #15 on page 62).
	The default setting is “PARALLEL”.
2	Start Windows 95/98/Me/NT4.0/2000/XP
	and close all other applications.

●The following dialogue box will appear. Click [Cancel] to close it.

	● You must be logged in as an
	administrator in Windows NT4.0/2000/
	XP.
3	Insert the included CD-ROM into your
	CD-ROM drive.

● The [Choose Setup Language] dialogue box will appear.

Select the desired language that you want to use with this software from the drop-down list. Click [OK].

The installation will automatically start.

● If the [Choose Setup Language] dialogue box does not appear: The installation will automatically start.

● If the installation does not start automatically:

Click [Start]. Choose [Run...]. Type

“d:\setup” (where “d:” is the drive letter of your CD-ROM drive). Click [OK].

(If you are not sure what the drive letter is for your CD-ROM drive, use Windows Explorer and look for the CD-ROM drive.)

	The installation will start.
4	Follow the instructions on the screen
	until all files have been installed.

● Readiris OCR software can also be installed. For details about OCR software, see page 56.

● If the fax machine is not connected to your computer, the [Port Selection] dialogue box will appear. Select the port number that you want to use. If the fax machine is connected to your computer, the port number will be automatically detected.

To uninstall the software

1.Click [Start].

2.Point to [Settings], then click [Control Panel].

3.Double-click[Add/Remove Programs].

4.Select [Panasonic Multi-Function Station] from the list.

5.Click [Add/Remove...] (Windows 95/98/Me/ NT4.0) / [Change/Remove...] (Windows 2000/ XP), then follow the instructions on the screen.

Important notice for USB cable users

●If you use a USB cable with Windows XP, the following message may appear:

“The software you are installing for this hardware has not passed Windows Logo testing to verify its compatibility with Windows XP”

You can continue the installation with no problem.

●The screens shown in these instructions are from Windows Me.

●The screens may differ slightly from those of the actual product.

●The screens are subject to change for improvement without notice.

51