Error Messages

Display!

If the unit detects a problem, one or more of the following messages will appear on the display.

 

Display message

Cause & solution

 

 

 

 

 

There is something wrong with the unit. Contact our service

 

CALL SERVICE

 

 

 

 

personnel.

 

 

 

 

 

 

 

 

 

The shipping lock is locked. Unlock the shipping lock (p. 15).

 

CARRIAGE

 

ERROR

 

/

 

If the display messages still remain after unlocking, there is

 

 

something wrong with the carriage sensor. Contact our service

 

 

 

 

 

RELEASE

 

 

 

 

 

personnel.

 

SHIPPING

 

LOCK

 

 

 

 

 

 

 

 

 

 

 

 

There is something wrong with the drum unit. Replace the drum

 

CHANGE

 

DRUM

 

 

 

 

unit and the toner cartridge (p. 73).

 

 

 

 

 

 

 

 

The ADF cable is not connected correctly. Check the connection

 

CHECK ADF

CABLE

 

 

 

 

(p. 15).

 

 

 

 

 

 

 

 

 

The document was not fed into the unit properly. Reinsert the

 

CHECK DOCUMENT

 

 

 

 

document. If misfeeding occurs frequently, clean the document

 

 

 

 

feeder rollers (p. 79) and try again.

 

 

 

 

 

 

 

The drum unit is not inserted properly. Reinsert it correctly (p. 16).

 

CHECK

DRUM

 

 

 

 

 

 

 

 

 

 

 

 

The memory (telephone numbers, parameters, etc.) has been

 

CHECK

MEMORY

 

 

 

 

erased. Re-program.

 

 

 

 

 

 

 

The ADF cover is open. Close it.

 

CLOSE ADF

COVER

 

 

 

 

 

 

 

 

 

 

 

 

 

The printer cover is open. Close it.

 

COVER

OPEN

 

 

 

 

 

 

 

 

 

 

 

You tried to change the cable type setting (feature #15 on page

 

DATA IN

MEMORY

 

 

 

 

62), while the fax machine has a document in memory. Finish

 

 

 

 

sending faxes, print out the document in memory (p. 44) or cancel

 

 

 

 

the delayed transmission (feature #25 on page 63) and try again.

 

 

 

 

 

 

 

There is no space to store new entries in navigator directory.

 

DIRECTORY

FULL

 

 

 

 

Erase unnecessary entries (p. 28).

 

 

 

 

 

 

 

 

 

Recording paper was not fed into the unit properly. Reinsert the

 

FAILED

PICK UP

 

 

 

 

recording paper (p. 76).

 

 

 

 

 

 

 

The unit has a document in memory. See the other displayed

 

FAX IN MEMORY

 

 

 

 

message instructions to print out the document.

 

 

 

 

 

 

 

The memory is full of received documents due to a lack of

 

FAX MEMORY FULL

 

 

 

 

recording paper or a recording paper jam. Install paper (p.19) or

 

 

 

 

clear the jammed paper (p. 75).

When performing memory transmission, the document being stored exceeds the memory capacity of the unit. Transmit the entire document manually.

67

Page 69
Image 69
Panasonic KX-FLB756E manual Display message Cause & solution