Panasonic KX-FLB756E manual Using the scanner glass, Scan, Resolution Stop

Open the document cover.

Sending Faxes

Sending from memory

●Quick scan feature

You can scan the document into memory before sending.

1.Insert the document.

2.Enter the fax number.

3.Press ê.

●Transmitting reservation (Dual Access) feature

You can send the document even when the unit is just receiving a fax or sending a fax from memory.

1.Insert the document during fax reception or fax memory transmission.

2.Enter the fax number using the dial keypad, one-touch dial or navigator directory.

3.Press êor i.

●The document will be fed into the unit and scanned into memory. The unit will then transmit the data.

If the document exceeds the memory capacity (p. 81), sending will be cancelled. Transmit the entire document manually.

Note:

●Transmitting reservation (Dual Access) feature is not available when using the scanner glass.

Using the scanner glass

By using the scanner glass, you can send a page from booklets or small sized paper that cannot be sent with the auto document feeder.

●Confirm that there are no documents in the auto document feeder.

1

2 Place the document FACE DOWN on the scanner glass, matching the top edge of the document to the “ ” mark on the unit.

3 Close the document cover.

●If the original is a thick book, do not close the document cover.

	If necessary, press urepeatedly
4 to select the desired setting (p. 34).
5	Enter the fax number.
	Example:	NO.=5678901

8	Press ê.
	NEXT:PRESS	SCAN
	SEND:PRESS	START

●To send more pages, repeat steps 7 and 8.

9 Press i.

CONNECTING.....

Document cover

●To send a single page, skip to step 9.

●To send multiple pages, go to the next step.

Press êto scan the document into
6 memory.
Example:	PAGES=01	01%
	STANDARD
	!
	NEXT:PRESS	SCAN
	SEND:PRESS	START

Scanner glass

SCAN

7	Place the next page on the scanner glass.	RESOLUTION STOP
		FAX START

Note for the auto document feeder and the scanner glass

To stop transmission

Press {.

Sending report for confirmation

This report will provide you with a printed record of transmission results. To use this feature, activate feature #04 (p. 61). For the communication message in the result column, see page 66.

Journal report

The unit stores the 30 most recent fax communication results.

—To print manually, see page 80.

—To print automatically after every 30 new fax communications, activate feature #22 (p. 63).

For the communication message in the result column, see page 66.

35