Features Summary
65
Code Feature & Display Settings How the unit operates
You can confirm the status of the
other party’s machine.
If the ring back tone continues, the
other party’s machine may not be
a facsimile or may have run out of
paper. Check with the other party.
The connecting tone volume
cannot be adjusted.
#76
Setting the connecting tone
If you often have trouble when
sending a fax, this feature allows
you to hear connecting tones: fax
tone, ring back tone and busy tone.
CONNECTING TONE
=ON [±]
ON
OFF
#68
Setting the Error Correction
Mode (ECM)
To send a fax even if there is static
interference on the telephone line.
ECM SELECTION
=ON [±]
ON
OFF
This feature is available when the
transmitting/receiving stations are
ECM compatible.
#80
Resetting advanced features to
their default settings
SET DEFAULT
RESET=NO [±]
YES
NO
1. Follow steps 1 and 2 on page 64.
2. Press +or -to select “YES”.
3. Press w.
4. Press wagain.
5. Press p.
(The default setting is in bold type.)
#79
Saving on toner consumption
TONER SAVE
=OFF [±]
ON
OFF
“ON”: The toner cartridge will last
longer.
This feature may lower the print
quality.
#44
Setting the memory reception
alert
To alert you with a beeping sound
when a document which has been
received is stored into memory due
to some existing problem.
RECEIVE ALERT
=ON [±]
ON
OFF
If you are alerted by a slow
beeping sound, clear the printing
problem and make sure the unit is
supplied with enough paper to print
the stored document. The beeps
will stop.
KX-FLB756E (060-065) 03.2.19 4:22 PM Page 65