Printing (PC)
54
TransparenciesUse transparencies designed for laser printing.
●Load transparency sheets one page at a time for printing. Print side must face down.
●Remove each transparency after printing and place it on a flat surface to cool and to prevent it
from curling.
●Close the paper stacker extender (p. 18) while printing to prevent transparencies from curling.
●Do not re-use transparencies that have already been fed through the fax machine. This includes
transparencies that have been fed through and ejected without being printed on.
●Some types of transparencies have instructions recommending which side to print on. If the print quality
is poor, try printing on the other side.
LabelsUse labels designed for laser printing.
●Load label sheets one page at a time for printing. Print side must face down.
●Remove each label after printing.
●Do not use the following types of labels:
— Labels that are wrinkled, damaged or separated from the backing sheet.
— Any sheet of labels that has spaces in it where some of the labels have been removed.
— Labels that do not completely cover the backing sheet (see below).
Backing sheet
KX-FLB756E (050-059) 03.2.19 4:20 PM Page 54