5. Copier
32
5 CopierCopy
5.1 Making a copy
Illegal copies
LIt is unlawful to make copies of certain
documents.
Copying certain documents may be illegal in your
country. Penalties of fines and/or imprisonment may
be imposed on those found guilty. The following are
examples of items that may be illegal to copy in your
country.
– Currency
– Bank notes and checks
– Bank and government bonds and securities
– Passports and identification cards
– Copyright material or trademarks without the
consent of the owner
– Postage stamps and other negotiable
instruments
This list is not inclusive and no liability is
assumed for either its completeness or accuracy.
In case of doubt, contact your legal counsel.
Notice:
LInstall your machine near a supervised area to
prevent illegal copies from being made.
5.1.1 Using the scanner glass
1If the {COPY} light is OFF, turn it ON by pressing
{COPY}.
2Set the original (page 17).
3If necessary, change the resolution and contrast
according to the type of document.
LTo select the resolution, see page 32.
LTo select the contrast, see page 32.
4If necessary, enter the number of copies (up to 99).
5{START}
LThe unit will start copying.
6After you finish copying, press {STOP} to reset the
settings you set in step 3 and 4.
Note:
LTo stop copying, see page 65.
LYou can change the default operation mode (feature
#463 on page 52) and the timer before returning to
the default operation mode (feature #464 on page
53).
LCopied documents will be stacked on the upper
output tray. You can change the output tray for
copying (feature #466 on page 57).
LIf the {FAX AUTO ANSWER} indicator is ON, the
unit can receive faxes automatically even when in the
copy mode.
To select the resolution
1. Press {QUALITY} 2 times.
2. Press {V} or {^} repeatedly to select the desired
resolution.
–“TEXT/PHOTO”: For both text and photographs.
–“TEXT”: For text only.
–“PHOTO”: For photographs, shaded drawings,
etc.
3. {SET}
Note:
LYou can change the default resolution (feature #461
on page 57).
To select the contrast
You can adjust this setting depending on the darkness or
lightness of the document. 5 levels (light to dark) are
available.
1. {QUALITY}
2. Press {V} or {^} repeatedly to select the desired
contrast.
LTo make lighter, press {V}.
LTo make darker, press {^}.
3. {SET}
Note:
LYou can hold the previous contrast setting (feature
#462 on page 52).
{START}
{STOP}
{COPY}
{FAX AUTO ANSWER}
{QUALITY}
{SET}{V}{^}
FLB881-PFQX2732ZA-OI-en.book Page 32 Wednesday, July 18, 2007 11:22 PM