67

Remote operation of your answering machine (remote

activation ID)

Some answering machines will allow you to retrieve voice messages from a remote location. To deactivate the
fax machine while you are checking your messages, set the remote activation ID code for the answering
machine.
Important:
This ID must be different from the fax activation code (p. 74).

Receiving a voice message and fax document in one call

The caller can leave a voice message and send a fax document during the same call.
Inform the caller of the following procedures beforehand.
1. The caller calls your fax machine.
The answering machine will answer the call.
2. The caller can leave their message after the greeting message.
3. The caller presses ($)(9) (pre-selected fax activation code).
The fax machine will activate the fax function.
4. The caller presses their start button to send a document.
Note:
The fax activation code can be changed (p. 74).
If the wrong fax activation code is entered, the caller must wait at least 5 seconds to reenter the correct code.
1Press (MENU).
Display:
2Press (#), then (1)(2).
3Press (START/SET/COPY).
4Press or to select “ON”.
5Press (START/SET/COPY).
The display will show the pre-selected ID.
6Enter your ID number.
This ID can be from 1 to 5 digits in length using
0–9, £and #.
7Press (START/SET/COPY).
8Press (MENU).
SETUP ITEM [ ]
ID=11
MODE=ON
▼▲
MODE=OFF
▼▲
REMOTE TAM ACT.
1.SYSTEM SET UP
MENU
START/SET/COPY
/
Receiving Faxes
Fax/Copy