7.
computer. If the fax machine is connected to a computer before installing
2Insert the included
L The [Choose Setup Language] dialogue box will appear. Select the desired language that you want to use with this software from the
L If the [Choose Setup Language] dialogue box does not appear:
The installation will automatically start. L If the installation does not start
automatically:
Click [Start]. Choose [Run...]. Type
“D:\setup” (where “D:” is the drive letter of your
(If you are not sure what the drive letter is for your
The installation will start.
3When the setup program starts, follow the
4When the [Setup Type] dialogue box appears, select [Standard], then click
[Next].
L Readiris OCR software (page 47) and Device Monitor (page 49) will also be installed.
5When the [Connect Type] dialogue box appears, select [Connect directly with a USB cable.], then click [Next].
L The [Connect Device] dialogue box will appear.
6Connect the fax machine with the USB cable (page 42), then click [Next].
L If the fax machine is connected to your computer, the model name will be automatically detected.
LYou can change the names for the printer, PC fax, and scanner if necessary.
7Click [Install], then follow the
L The files will be copied to your computer.
Important notice for Windows XP users
LIf you use Windows XP, the following message may appear after step 6: “The software you are installing for this hardware has not passed Windows Logo testing to verify its compatibility with Windows XP”
This is normal and the software will not cause any difficulties with your operating system. You can continue the installation with no problem.
Note:
LIf the screen prompts to insert the
To use the other unit with the computer
You need to add the printer driver for each unit, as follows.
Click [Start], then select [All Programs] or [Programs] → [Panasonic] → [KX- FLB800_FLM650 Series] → [Add Printer Driver]. Then follow the
Note:
LYou cannot connect more than one unit to the same computer at the same time.
To modify the software
You can select the components to install anytime after the installation.
For Windows XP and Windows 2000 users, you must be logged in as an administrator in order to modify
1.Click [Start], then select [All Programs] or
[Programs] → [Panasonic] → [KX- FLB800_FLM650 Series] → [Uninstall or Modify].
2.Select [Modify] and click [Next], then follow the
To uninstall the software
For Windows XP and Windows 2000 users, you must be logged in as an administrator in order to uninstall
1.Click [Start], then select [All Programs] or
[Programs] → [Panasonic] → [KX-
43