Panasonic KX-FLM653HK manual Envelopes

7. Multi-Function Station software

–Labels that do not completely cover the backing sheet as follows.

7.4.4 Envelopes

Use envelopes designed for laser printing. We recommend the following:

–High quality envelopes of 90 g/m2 paper,

–Envelopes that have thin, sharply creased leading edges, and

–Envelopes that have diagonal seams.

LYou can load 1 envelope of 90 g/m2 paper at a time for printing, print-side down.

LInsert envelopes, print-side down (1), then adjust the recording paper guides (2).

1

2

LRemove each envelope after printing.

Note:

LWrinkles may occur in some cases, even if

high quality envelopes are used.

LAvoid printing in high humidity, above 70% relative humidity (RH). High humidity may cause the envelope to curl, pick up excess

toner or seal the envelope.

LAvoid printing below 10 °C with less than

30% RH, or it may cause light printing.

LStore envelopes away from moisture and humidity, where they can lay flat and their edges will not be bent or damaged. The humidity should not exceed 70% RH.

Do not use envelopes with any of the following characteristics (using these may result in paper jams):

LIrregularly shaped envelopes

LEnvelopes with curls, wrinkles, nicks, twists,

dog-ears or other damage

LEnvelopes with side seam construction

LHighly textured envelopes, or envelopes with extremely shiny surfaces

LEnvelopes that seal by removing a peel-off strip

LEnvelopes with more than one flap to be sealed

LSelf-adhesive envelopes

LEnvelopes that are baggy or not sharply creased

LEmbossed envelopes

LEnvelopes that have previously been printed on

LEnvelopes that include cotton and/or fibre material

Side seam	Peel-off strip Multiple flaps
construction

Twisted Curled Bent-edged

Waved Dog-eared Self adhesive

46