3. Printer

26

3.1.1 Using the manual input tray

You can print on plain paper and labels.
The manual input tray is used only for printing with the
computer and can hold one page at a time. When
printing multiple pages, add a next page after the first
page has been fed into the unit.
LPlease refer to page 85 for information on recording
paper.
1Adjust the width of the guides (1) to the size of the
recording paper.
2Insert the paper, print-side down (2) until the unit
grasps the paper and a single beep is heard.
Note:
LIf the paper is not inserted correctly, re-adjust the
paper, or the paper may jam.
LMake sure the unit grasps the recording paper as
specified in step 2. The display shows the following.
PAPER IN TRAY #2
FOR PC PRINTING
To print on labels
Use labels designed for laser printing. We recommend
the following:
Avery®
5160/5161/5162/5163/5164/5165/5167/5168
XEROX®
LWH100/LWH110/LWH120/LWH130/LWH140
LUse the manual input tray to print labels.
LLoad label sheets one page at a time for printing,
print-side down.
LRemove each label after printing.
LDo not use the following types of labels:
Labels that are wrinkled, damaged or separated
from the backing sheet.
Any sheet of labels that has spaces in it where
some of the labels have been removed.
Labels that do not completely cover the backing
sheet as follows.
Load the recording paper after you have started
printing with the computer.
1
2
MB271-781-PFQX2722ZA-OI-en.book Page 26 Tuesday, May 22, 2007 5:20 PM