2. Preparation
15
For assistance, please visit http://www.panasonic.com/help
2 Preparatio n2For assistance, plea se visit http://w ww.panasonic.co m/helpConnections and Setup

2.1 Connections

Caution:
LWhen you operate this product, the power outlet
should be near the product and easily
accessible.
* The pictured model is KX-MB781.
Note:
LIf any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device (KX-MB781 only).
Using surge protectors
LThe warranty does not cover damage due to power
line surges or lightning. For additional protection, we
recommend using surge protectors (9).
If the unit shares a single telephone line with a DSL
service (KX-MB781 only)
Fax transmission/reception may be disturbed, noise
interference may be heard during telephone
conversations, or Caller ID (page 45) may not function
properly. A filter to prevent this is provided by your
provider. Please attach the filter (j) to the telephone
line cord of the unit.
* The pictured model is KX-MB781.
1Power cord
LConnect to a power outlet
(120 V, 60 Hz).
2Telephone line cord*1
LConnect to a single telephone line jack (RJ11).
3[EXT] jack*1
LYou can connect an answering machine or an
extension telephone. Remove the stopper if
attached.
4Answering machine (not included)*1
5Handset unit (optional) connection jack*1
LYou can connect the optional handset unit (page
62). Remove the seal if attached.
6Network router/Network hub (not included)*1
LAlso connect networked computers.
7To the internet*1
8LAN cable (not included)*1
LTo assure continued emission limit compliance,
use only shielded LAN cable (category 5 straight
cable).
*1 KX-MB781 only
Important notice for the USB connection
LDo NOT connect the USB cable until prompted by
the Multi-Function Station (page 22).
4

7

12

8

3
6

9

5

9

j

MB271-781-PFQX2722ZA-OI-en.book Page 15 Tuesday, May 22, 2007 5:20 PM