Panasonic KX-P7105, KX-P7110 5 Schematic Diagram

4.5.5.10. Network I/F ( only for KX-P7110 )
The Network I/F is composed of the Mac&Phy (IC6) that is a single-chip 10/100 Mb/s Ethernet Controller. The Mac&Phy has a full
featured physical layer device with integrated PMD (Physical Medium Dependent)sub-layers to support both 10BASE-T and
100BASE-TX Ethernet protocols.
The control signals of the Network I/F are as follows.
TPRDM, TPRDP: Receive Data;
Differential common input buffer. This differential common input can be configured to accept either 100BASE-TX or
10BASE-T signaling.
TPTDM, TPTDP: Transmit Data;
Differential common output driver. This differential common output is configurable to either 10BASE-T or 100BASE-
Txsignaling.
5 Schematic Diagram
Individual circuit diagrams are used in this section for ease of explanation. When a signal or circuit involves more than one
diagram, a code number provides easy location of the continued circuit. This number indicatesthe schematic number and
location coordinates, as shown in the following examples:
87
KX-P7105 / KX-P7110