3.14. Pickup, Paper Feed, Registration and Transfer Rollers

Before handling, perform the following steps A - B :
A. Remove the Gear Support Bracket and 8 gears ( see Section 3.11.1 ).
B. Remove the Front Cover ( see Section 3.1 ).

3.14.1. Pickup Roller and Pickup Solenoid

1. Release the bushing hook and slide out the bushing.
2. Slide the Pickup Roller Shaft with gears in the arrow direction, then remove the Pickup Roller.
3. If necessary, remove the Pickup Roller Gears and bushing by releasing the gear hook from the Pickup Roller Shaft. Then,
remove the Pickup Roller Shaft.
4. Disconnect the connector CN011 from the Engine Control Board.
5. The Pickup Roller Lever and Pickup Solenoid and spring can be removed from the chassis frame by removing the 2 screws.
46
KX-P7105 / KX-P7110