Panasonic KX-P7105, KX-P7110 3.12. Upper Exit Roller Holder

3.12. Upper Exit Roller Holder
Before handling, perform the following steps A - B :
A. Remove the Right, Left and Top Covers ( see Section 3.2 ).
B. Remove the Engine Board Shield Cover ( see Section 3.7.1 ).
3.12.1. Upper Exit Roller Holder
(1) Remove the 4 screws.
(2) Separate the Upper Exit Roller Holder.
(3) Disconnect connector CN013 on the Engine Control Board.
3.12.1.1. Upper Exit Roller Holder Disassembly
1. Remove the 2 screws.
2. Separate the Holder Cover with solenoid from the Upper Exit
Roller Holder.
3. Remove the gears from the roller holder.
41
KX-P7105 / KX-P7110