caller, and disconnects the call. (Caller ID
subscribers only)
*1 This is called first ring. If you do not want
the first ring to sound, turn this setting to
“Off” (page 29).
Important:
RWhen the unit receives a call from a
number that is stored in the call block list or
a call without a recognized phone number,
the call is logged in the caller list
(page 34) with after the call is
disconnected.
Storing unwanted callers
You can store up to 100 phone numbers in the
call block list.
Important:
RYou must store the phone number with an
area code in the call block list.
nFrom the caller list:
1MCN CID
2MbN: Select the entry to be blocked. a
MDetailN
RTo edit the number: MMenuN a
MbN: “Edit” a MSelectN
Press MEditN repeatedly until the
phone number is shown in the
10-digit format. And then, press
MSaveN. Go to step 5.
3MMenuN
4MbN: “Save CID” a MSelectN
5MbN: “Call block” a MSelectN
6MbN: “Yes” a MSelectN
7Edit the phone number if necessary
(24 digits max.).
8MSaveN a MOFFN
nBy entering phone numbers:
1MMenuN (right soft key) #217
2MMenuN a MbN: “Add” a MSelectN
3Enter the phone number (24 digits
max.).
4MSaveN a MOFFN
Blocking incoming calls without
phone number
You can reject a call when no phone number
is provided, such as a call just showing “Out
of area”.
1MMenuN (right soft key) #240
2MbN: Select the desired setting. a MSaveN
3MOFFN
Setting the first ring for the call block
list
If you do not want the first ring from a number
on the call block list to sound, turn the first ring
setting to “Off”. The default setting is “On”.
1MMenuN (right soft key) #173
2MbN: Select the desired setting. a MSaveN
3MOFFN
Viewing/editing/erasing call block
numbers
1MMenuN (right soft key) #217
2MbN: Select the desired entry.
RTo exit, press MOFFN.
3To edit a number:
MEditN a Edit the phone number. a
MSaveN a MOFFN
To erase a number:
MEraseN a MbN: “Yes” a MSelectN a
MOFFN
Baby monitor
This feature allows you to listen in on a room
where another handset is located, allowing
you to easily monitor from different areas of
the house or place. The monitored handset
(placed in a baby’s room, for example) will
automatically call the monitoring handset or
the phone number stored when it detects
sound.
Important:
RYou should perform a test run of the baby
monitor procedure to ensure that the baby
For assistance, please visit http://www.panasonic.com/help 29
Programming
PRW120(en)_1016_ver041.pdf 29 2013/10/16 10:40:18