Panasonic KX-PRW120 operating instructions Registering a unit, Operating additional units

Programming

3MMenuN a MbN: “Add new entry” a MSelectN

4Edit the date if necessary. a MOKN

5 Set the desired time. a MOKN

6Enter a text memo (30 characters max.; page 17). a MOKN

7MbN: Select the desired alarm tone. a MSelectN 2 times

R You can select “Off” if you prefer not to hear an alarm tone.

R We recommend selecting a different ringer tone from the one used for outside calls.

8MOFFN

Note:

RTo stop the alarm, press MStopN or place the handset on the base unit or charger.

RWhen the handset is in use, the alarm will not sound until the handset is in standby mode.

Viewing entries

1MMenuN (right soft key) a a MSelectN

2To see the entries on the selected date, press MSelectN.

To see the schedule list, press MListN. R You can see detailed information about the schedule by pressing MMenuN. a MbN: “Detail” a

MSelectN

Editing an entry

1MMenuN (right soft key) a a MSelectN

2MListN a MbN: Select the desired entry.

3 MMenuN a MbN: “Edit” a MSelectN 4 Edit the date if necessary. a MOKN 5 Edit the time if necessary. a MOKN

6Edit the text memo if necessary (30 characters max.). a MOKN

7MbN: Select the desired alarm tone. a MSelectN 2 times a MOFFN

Erasing an entry

Schedule alarm entries are not erased automatically after the schedule alarm sounds. Erase unwanted entries.

1MMenuN (right soft key) a a MSelectN

2MListN a MbN: Select the desired entry.

3 MMenuN a MbN: “Erase” a MSelectN

4 MbN: “Yes” a MSelectN a MOFFN

Erasing all entries

1MMenuN (right soft key) a a MSelectN

2MListN a MMenuN

3MbN: “Erase all” a MSelectN

4 MbN: “Yes” a MSelectN

5 MbN: “Yes” a MSelectN a MOFFN

Registering a unit

Operating additional units

Additional handsets

Up to 6 handsets can be registered to the base unit.

Important:

RThe additional handset model recommended for use with this unit is noted on page 4. If another handset model is used, certain operations may not be available.

Registering a handset to the base unit

The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit (for example, is displayed even when the handset is near the base unit), re-register the handset.

1Handset:

MMenuN (right soft key) #130

32For assistance, please visit http://www.panasonic.com/help