4Enter the desired name (16 characters
max.). a MOKN
5Enter the desired number (24 digits
max.). a MOKN a MSelectN a MOFFN
Turning on/off the new message alert
setting
1MMenuN (right soft key) #338
2MbN: “On/Off” a MSelectN
3MbN: Select the desired setting. a
MSaveN a MOFFN
Editing the set phone number
1MMenuN (right soft key) #338
2MbN: “Notification to” a MSelectN
3MMenuN a MbN: “Edit” a MSelectN
4Edit the name if necessary (16 characters
max.). a MOKN
5Edit the phone number if necessary (24
digits max.). a MOKN a MSelectN a
MOFFN
Erasing the set phone number
1MMenuN (right soft key) #338
2MbN: “Notification to” a MSelectN
3MMenuN a MbN: “Erase” a MSelectN
4MbN: “Yes” a MSelectN a MOFFN
RThe new message alert setting is
turned off.
Activating/inactivating the remote
access code to play messages
If you activate this feature, you must enter the
remote access code (page 39) to play the
new message from the new message alert
call. This is so that unauthorized parties
cannot listen to your messages. The default
setting is “Inactivate”.
–“Inactivate”: You can listen to the
message by pressing 4 to play new
messages (without entering the remote
access code).
–“Activate”: You must enter your remote
access code (page 39) and then press 4
to play new message.
1MMenuN (right soft key) #338
2MbN: “Remote code” a MSelectN
3MbN: “Activate” or “Inactivate” a
MSaveN a MOFFN
Listening to messages
After you answer the new message alert, you
can listen to the messages as follows.
nWhen the remote access code is set to
“Inactivate”:
Press 4 to play the new message during
the announcement.
nWhen the remote access code is set to
“Activate”:
1Enter the remote access code
(page 39) during the announcement.
2Press 4 to play the new message.
Note:
RWithin 10 seconds after listening to new
messages, you can press #9 during the
call to turn off the new message alert by a
call feature.
REven if the unit makes a new message alert
call, the handset redial list does not show
the record.
Remote operation
Using a touch-tone phone, you can call your
phone number from outside and access the
unit to listen to messages or change
answering system settings. The unit’s voice
guidance prompts you to press certain dial
keys to perform different operations.
Remote access code
A 3-digit remote access code must be entered
when operating the answering system
remotely. This code prevents unauthorized
parties from listening to your messages
remotely. The default setting is “111”.
For assistance, please visit http://www.panasonic.com/help 39
Answering System
PRW120(en)_1016_ver041.pdf 39 2013/10/16 10:40:18