Programming

7Edit the phone number if necessary. a MOKN a MSelectN

Erasing an outside monitoring number

1Press MMenuN on the handset being monitored.

2MbN: On/Offa MSelectN

3 MbN: Ona MSelectN

4 MbN: Select the outside line. a MEditN

5 MMenuN a MbN: Erasea MSelectN

6 MbN: Yesa MSelectN a MOFFN

Baby monitor sensitivity

You can adjust the sensitivity of the baby monitor. Increase or decrease the sensitivity to adjust the sound level needed to trigger the baby monitor feature.

RThis feature cannot be set during a monitoring call.

1Press MMenuN on the handset being monitored.

2MbN: Sensitivity levela MSelectN

3MbN: Select the desired setting. a MSaveN a MOFFN

Answering the baby monitor

nWhen monitoring with a handset: Press MN to answer calls.

If you want to respond from the monitoring handset, press MMuteN.

R The monitoring handset will answer calls automatically when the auto intercom feature is set to On(page 16).

Note:

R If you receive an outside call when communicating with the monitored handset, you hear 2 tones. To answer the call, press MOFFN, then press MN.

nWhen monitoring from an outside line: To answer a call, follow the operation for your phone.

If you want to respond from the monitoring handset, press #1 using tone dialing. You can turn off the baby monitor feature by pressing #0.

Note:

R2 minutes after the monitored handset starts a call, communication between the monitored handset and monitoring phone line is turned off automatically.

Other programming

Changing the handset name

Each handset can be given a customized name (“Bob”, “Kitchen”, etc.). This is useful when you make intercom calls between handsets. You can also select whether or not the handset name is displayed in standby mode. The default setting is No. If you select Yeswithout entering any handset name,

Handset 1to Handset 6is displayed.

1MMenuN (right soft key) #104

2Enter the desired name (max. 10 characters).

3MSaveN

4MbN: Select the desired setting. a MSelectN 2 times a MOFFN

Calendar/Schedule

You can program 20 schedule alarms for each handset using the calendar. A schedule alarm sounds at the set time for 1 minute. A text memo can also be displayed for the schedule alarm.

Important:

RMake sure the unit’s date and time setting is correct (page 12).

Adding a new entry

1MMenuN (right soft key) a a MSelectN

2MbN: Select the desired date. a MSelectN

For assistance, please visit http://www.panasonic.com/help

31

Page 31
Image 31
Panasonic KX-PRW120 Other programming, Answering the baby monitor, Changing the handset name, Calendar/Schedule