226
Care and Maintenance
4
a)
Holding the green tab on the right, slide the fuser out
until it stops.
b)
Press the green lever on the left to release the safety
catch.
5
a)
Hold the fuser as shown below, and slide it out of the
printer.
b)
Close the printer’s front door.
SAFETY CAUTIONS:
•
The fuser unit weighs approximately 3.1 k
g
{6.8 lbs.}. Take care
when handling it.
•
Do not touch the roller and the parts around the roller when
handling the fuser, because they may be hot.
.
a
b
CAUTION:
HOT SURFACE INSIDE
ba
Roller