52
Setup
The multi-purpose tray (MPT) serves as an additional tray for loading any
type of media that ranges in size from 91 mm x 254 mm to 216 mm x 356
mm (3.6" x 10" to 8.5" x 14"). Use it to load a single sheet or a stack of
media, depending on the media’s type and thickness.
Use the multi-purpose tray to accomplish the following:
Print on standard and special media
Standard media
—Laser paper [75 to 165 g/m2 (20 to 44 lbs.)]
Special media
—Labels
—Envelope (#10 or larger size) [Black Text only]
—Transparency (The print quality may not be stable. Use the media tray
for best reliability.)
—Coated paper
Two-sided printing (Duplex printing) on laser paper
You should not expect the same print quality and reliability that you get with
one-sided printing. For details, see “Two-sided printing (Duplex printing)”
on page 292.
To set media thickness switch:
Because the printer accommodates various media weights from the multi-
purpose tray, media thickness can be manually selected for the most
reliable paper-picking. Follow these steps:
1

a) Open the left side door.

b) Move the switch to the desired setting.

The green media thickness switch is located on the paper feeder
and has three settings:
Loading media in the multi-purpose tray

a

b

Thick
Middle
Thin