35
Before You Start
Scanner panel overview
This section describes the functions of the scanner panel, illustrated below:
The scanner LCD has two 20-character lines to display the scanner’s or
duplicator’s status/error messages or the duplicator’s menu settings. When
the duplicator is ready, “Ready” with duplicate settings such as number of
copy, density setting is displayed.
The activity light indicates the status of the scanner. It has the following
meanings:
*1 Blinking with an interval of approximately 1.7 seconds
*2 Blinking with an interval of approximately 0.9 second
*3 Blinking with an interval of approximately 0.7 second
This light Indicates
READY/ERROR indicator—
• The READY indicator (green)
ON: the scanner is ready for operation.
Blinking: the scanner is initializing or scanning.
• The ERROR indicator (orange)
ON: an internal error (Call for Service Error) has
occurred.
Blinking: user correctable error such as ADF jam has
occurred.
Status READY Indicator
(green) ERROR Indicator
(orange)
Diagnosing…/Initializing… Blinking*1OFF
Ready ON OFF
Scanning Blinking*2OFF
Scanning (for duplicate) Blinking*3OFF
Printing (for duplicate) Blinking*1OFF
User Correctable Error OFF Blinking
Call for Service Error OFF ON

LCD (Liquid

Crystal Display)

panel
INCREASE/NEXT
MODE
READY/ERROR
STOP START
B/W
RESET ENTER
START
COLOR

Activity light

READY/ERROR