29
Before You Start
Interface: SCSI interface requirements
SCSI cable:
SCSI-2 (FAST SCSI) compatible (page 298)
SCSI-2 board:
ASPI Manager compatible SCSI-2 board
(Adaptec AHA-2940 is recommended.)
ASPI manager:
ASPI Manager is required.
(See the SCSI-2 board manual.)
Parallel interface requirements
ECP mode:
Based on the IEEE P1284-C standard
(An ECP compatible parallel port is
recommended for Windows 95.)
To turn on the ECP mode, use the computer’s
BIOS setup. Refer to the computer’s
documentation for details.
Cable: Appropriate interface cables for your network or
printer connection
To operate the KX-PS8100 system effectively, see the following.
CPU: More than PowerPC
(faster CPU is recommended.)
Operating system: Apple system software version 7.5.x, 7.6.x or 8.0
(Printer Driver)
Apple system software version 7.5.x, 7.6.x, 8.0, 8.1
or 8.5 (Scanner Driver)
Interface: Ethernet Card (Printing):
The KX-PS8100 Ethernet card does not enable
printing directly from the Macintosh computer.
Printing from a Macintosh can only be performed
if the KX-PS8100 and Macintosh are connected
to a network.
SCSI cable (Scanning):
SCSI-2 (FAST SCSI) compatible (page 298)
Cable: Appropriate interface cables for your network or
printer connection
To use ColorSync Color Matching of the scanner driver, ColorSync Manager
Version 2.0 or later is required.
Photoshop Plug-in is supported on Adobe Photoshop 3.0 or later.
With a Macintosh computer