71
Connecting the Printer to a Network
NOTE:
•Shut off the printer before connecting it to any network device. Only one
Ethernet connection should be made to the printer at a time.
To connect a thinnet cable to the printer:
1
Make sure the computer, printer and the other
connected peripheral devices are turned off.
2
Connect the MAU transceiver to the AUI connector on
the back of the printer. Secure the connection using the
slide latch on the AUI connector.
3
Connect the thinnet cable to the BNC connector on the
transceiver.
4
Turn on the printer and then the computer.
To connect a thicknet cable to the printer:
1
Make sure the computer, printer and the other
connected peripheral devices are turned off.
2
Connect the thicknet cable connector to the AUI
connector on the back of the printer.
3
Turn on the printer and then the computer.
AUI connector
Parallel interface
connector
RJ-45 jack