254
Care and Maintenance
Some operation errors cause the ERROR indicator to blink and printing to
stop. A message will be displayed on the LCD panel until the problem is
fixed. If the LCD panel message includes the instruction, Call for Service,
contact an authorized service representative.
In addition, if the following conditions occur, turn off and unplug the printer
and scanner from the outlet and contact a qualified service representative:
The power cord or plug is damaged or frayed.
Liquid has been spilled into the printer.
The printer and scanner have been exposed to rain or water.
The printer and scanner do not operate normally though the operating
instructions are being followed. Adjust only those controls that are
described in the operating instructions; improper adjustment of other
controls may result in damage and will often require extensive work to
restore the printer and scanner to normal operation.
Upper Tray
Empty
Add media to Upper tray.
Upper Tray
Not installed
Install Upper tray.
Warming Up Printer is warming up.
Yellow Toner
Empty
Replace yellow toner.
Yellow Toner Cartridge
Not installed
Install yellow toner cartridge.
Message Corrective Action/Additional Information
LCD panel service calls