With the Base Unit

Connecting the headset to the base unit

Connect the headset to the headset jack as shown.

Microphone

(EXIT)

Earpiece

Headset

Jack

(DIGITAL!SP-PHONE/HEADSET)

Fasten the headset cord to prevent it from being disconnected.

Hook

Making/Answering calls

1

Press (DIGITAL!SP-PHONE/HEADSET)to make or answer a call.

If you misdial when making a call, press (DIGITAL!SP-PHONE/HEADSET)

 

twice and dial again.

2

To hang up, press (DIGITAL!SP-PHONE/HEADSET).

To adjust the headset receiver volume (High, Medium or Low):

While using the headset, press Ñ or Ö.

To switch to the speakerphone while using the headset:

EXIT=SP-phone is displayed. Press (EXIT). To return to the headset, press (EXIT) again.

Each time you press (EXIT), the call will switch to the headset or speakerphone. While in the speakerphone mode, “EXIT=Headset” is displayed.

During a conversation using the headset, you can switch the call to the handset by lifting it off the cradle.

If you disconnect the headset during a conversation, you can continue the conversation with the speakerphone.

Useful Information

75

Page 75
Image 75
Panasonic KX-TG2670N operating instructions Connecting the headset to the base unit, Making/Answering calls